Integral Preamplifier Acoustic Emission Sensor Description and Features Operating Specifications PAC’s integral preamp sensors were specifically engineered to attain high sensitivity and have the capability to drive long cables without the need for a separate preamplifier. Incorporating a low-noise input, 40 dB preamplifier and a filter all inside the sensor housing, these transducers are completely enclosed in metal stainless steel (or aluminum) housings that are treated to minimize RFI/EMI interference. Care has also been taken to thermally isolate the critical input stage of the preamplifier in order to provide excellent temperature stability over the range of -35º to 75º C. Their integrated Auto Sensor Test (AST*) capability allows these sensors to pulse as well as receive. This feature lets you verify the sensor coupling and performance at any time Completely shielded crystal for maximum RFI/EMI immunity Applications This sensor provides additional noise rejection for applications such as production line process monitoring including punch press monitoring, forming operations and stamping, and process control applications such as leak detection within process control plants in the presence of flow and process noises. Due to continuing improvement, MISTRAS Group, Inc. reserves the right to amend specifications without notice. Copyright © 2010 MISTRAS Group, Inc. All Rights Reserved. Email: [email protected] www.mistrasgroup.com Products & Systems Division 195 Clarksville Road, Princeton Junction, NJ 08550 Frequency response of the R30I-AST. Calibration based on ASTM E1106; Calibration based on ASTM E976. * AST — Auto Sensor Testing feature allows AE systems to control the sensor as a pulser and a receiver at the same time. It can therefore characterize its own condition as well as send out a simulated acoustic emission wave that other sensors can detect, so the condition of the nearby sensors also can be tested.