General Purpose, 300 kHz Resonant Frequency Acoustic Emission Sensor Operating Specifications The Alpha series family of sensors features SMA connectors versus the Microdot connectors found on PAC’s RXX series of passive sensors. The Alpha series includes R3α, R6α, R15α, R30α R50α, R80α and WSα sensors. The major improvements in Alpha series over the RXX series include: • Use of the more popular SMA type of connector. • Cavity is machined from a solid stainless steel rod making for a simpler and more robust design. • Dramatically increased thickness of the ceramic shoe for better mechanical stability. • Distance from the bottom of the ceramic shoe to the bottom edge of sensor cavity increased for better insu lation resistance and ground avoidance. • Introduced a 30-degree angle at the bottom edge of the sensor cavity. All these improvements make the Alpha series sensors more robust, reliable and greatly reduce the possible grounding of the cavity to the structure caused by wet environment. Sensor to Preamp Cable Application This sensor provides additional noise rejection for applications such as production line process monitoring applications such as punch press monitoring, forming operations, stamping, applications and process control applications such as leak detection within process control plants in the presence of flow and process noises. Completely enclosed crystal for RFI/EMI immunity Due to continuing improvement, MISTRAS Group, Inc. reserves the right to amend specifications without notice. Copyright © 2010 MISTRAS Group Inc. All Rights Reserved. Email: [email protected] www.mistrasgroup.com Sensors include NIST Calibration Certificate & Warranty 195 Clarksville Road, Princeton Junction, NJ 08550 Products & Systems Division Frequency response of the R30a. Calibration based on ASTM E1106; Calibration based on ASTM E976.