High Sensitivity Acoustic Emission Sensor Description and Features Operating Specifications The R1.5 is a low frequency and high sensitivity AE sensor with 14 kHz resonance frequency, 85 dB peak sensitivity and useful bandwidth from 5 to 20 kHz. The sensor has a standard 1 meter RG58 coax cable and BNC connector on the side of the sensor. The cavity is made from stainless steel. It is approximately 1.55” (40 mm) high. These transducers are completely enclosed in metal stainless steel housings, fabricated to minimize RFI/EMI Completely shielded crystal for maximum RFI/EMI Applications This sensor is normally used in structural health good choice for pipeline leak detection. monitoring of concrete and steel structures. It is also a Ordering Information and Accessories Frequency response of R1.5I. Calibration based on ASTM E 1106. 195 Clarksville Road, Princeton Junction, NJ 08550 Phone: 609-716-4000 Fax: 609-716-0706 Email: [email protected] Internet: www.pacndt.com Due to continuing improvement, Physical Acoustics Corp. (PAC) reserves the right to amend specifications without notice. Copyright © 2008 MISTRAS Group Inc. All Rights Reserved. A Member of the MISTRAS Group Inc. Rev. 12/07 #236-07