*mydirectindustry

MPL-F-266

Product catalog summary

Product Overview: The 266nm Pulsed Solid State Laser by PhotonTec Berlin GmbH is an all-solid-state laser known for its ultra-compact design, long lifetime, and ease of use. It offers low-cost ownership and is suitable for various applications including UV curing, micro material processing, CD carving, medical treatment, and scientific research.

Specifications:

Polarization Ratio: >100:1
Average Output Power: 1mW – 50mW
Repetition Rate: 1kHz – 5kHz with external TTL signal; fixed rates available
Operating Temperature: 10 - 35°C
Power Supply Unit Dimensions: 238(L)x146(W)x102(H) mm, 2.3kg
Laser Head Dimensions: 287(L)x224(W)x100.5(H) mm, 4.2kg
Warranty: 12 months
Beam Size: Elliptical 4:1, ~2mm
Expected Lifetime: 10,000 hours
Pulse Duration: ~7 ns
Average Power Stability: <5%, <10% (rms, 4 hours)
Operating Mode: Pulsed with passive Q-switching
Single Pulse Energy: 0.1 – 5 µJ
Transverse Mode: Near TEM00
Wavelength: 266 ± 1 nm

Important Notes:

The beam profile is less optimal compared to 532nm due to nonlinear walk-off.
Improper use or operation above specified conditions can reduce the laser's lifetime.
A non-condensing environment is required for storage and operation below the ambient dew point.
Specifications are subject to change without notice.

Catalog excerpts

266nm Pulsed Solid State Laser Features - All solid state laser - Ultra compact design - Long lifetime - Ease-to-use - Low cost ownership - UV curing - Micro materal processing - CD carving - Medical treatment - Scientific research Operating mode pulsed with passive Q-switching Transverse mode average output power Single pulse energy (µJ) ~7 fixed repitition rate and stable pulse energy, e.x. 1kHz, 2kHz, ..., 5kHz controllable Repitition rate different repitition rate 1kHz – 5kHz with external TTL signal uncontrollable Undifined repitition rate and unstable pulse energy Average power stability (rms, 4 hours) Beam size Polarization ratio Expected lifetime (hours) Laser head Power supply unit Notes: 1. Due to nonlinear Walk-off, the beam profile is not so good as the one at 532nm. Notes: 2. Reduced lifetime if unproperly used or used above operating conditions 3. A non-condensing environment is required for storage and operation below the ambient dew point. 4. Product specifications are subject to change without notice. PhotonTec Berlin GmbH Max-Planck-Str. 3 D-12489 Berlin Germany

Open the catalog to page 1

MPL-F-266

MPL-F-266

Catalog excerpts

All PhotonTec Berlin GmbH catalogs and technical brochures