*mydirectindustry

MLL-III-593.5

Product catalog summary

Product Overview:
The document provides technical specifications for the 589nm DPSS Laser by PhotonTec Berlin GmbH. This laser is characterized by its all-solid-state design, ultra-compact form, long lifespan, ease of use, and low cost of ownership.

Key Features:

Ultra-compact design with dimensions of 154(L) × 155(W) × 95(H) mm³ and a weight of 1.5 kg.
Low amplitude noise (<2%, <3% rms, 20Hz-20MHz).
High polarization ratio (>100:1) and expected lifetime of 10,000 hours.
Beam divergence of <1.5 mrad and beam diameter at the aperture of ~2.0 mm.
Power stability of <3%, <5% rms over 4 hours.
Continuous wave operating mode with output power options of 5, 10, 20, and 30 mW.
Transverse mode TEM00 and wavelength of 593.5 nm.

Applications:

Optical sensors
Spectrum analysis
Instrumentation
Measurement
Scientific research

Technical Specifications:

Operating temperature range: 10 - 35°C.
Warm-up time: <10 minutes.
Pointing stability after warm-up: <0.05 mrad.
Power supply unit dimensions: 133(L) x 130(W) x 65(H) mm³, weight 1.2 kg, suitable for 90-260VAC.
Laser head dimensions: 141(L) x 73(W) x 46(H) mm³, weight 0.6 kg.

Additional Notes:

An OEM power supply unit is available.
Reduced lifetime if used improperly or beyond specified operating conditions.
Non-condensing environment required for storage and operation below ambient dew point.
Specifications are subject to change without notice.

Warranty: 1 year.

Catalog excerpts

The Photonics Solution Company 589nm DPSS Laser Features - All solid state laser - Ultra compact design - Long lifetime - Ease-to-use - Low cost ownership - Optical sensor - Spectrum analysis - Instrument - Measurement - Scientific research Operating mode continuous wave Transverse Mode Beam Divergence, Full Angle (mrad) Beam Diameter at the Aperture (mm) Power Stability (rms, 4 hours) Polarisation Ratio Amplitude noise (rms, 20Hz-20MHz) Warm-up time (minutes) Pointing stability after warm-up (mrad) Expected lifetime (hours) Laser head Power supply unit (Table Top, 90-260VAC) Notes: 1. An OEM power supply unit is available. 2. Reduced lifetime if improperly used or used above operating conditions. 3. A non-condensing environment is required for storage and operation below the ambient dew point. 4. Product specifications are subject to change without notice. PhotonTec Berlin GmbH Max-Planck-Str. 3 D- 12489 Berlin Germany

Open the catalog to page 1

All PhotonTec Berlin GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list