*mydirectindustry

MIL-III-1064

1 / 1 PageView full catalog

MIL-III-1064

Product catalog summary

Diode Pumped Infrared Solid-State Laser at 1064nm

Features:

Ultra compact design
Long lifetime
Low owning cost
Ease of use

Applications:

Research
Measurement
Optical instruments
Spectrum analysis

Specifications:

Wavelength: 1064±1 nm
Output Power: Options of 100, 300, 500, 800, 1000, 1500 mW
Transverse Mode: TEM00
Operating Mode: Continuous Wave (CW)
Power Stability: Less than 1%, 3%, or 5% over 4 hours
Warm-up Time: Less than 10 minutes
M2 Factor: Less than 1.5
Beam Divergence: Full angle less than 1.5 mrad
Beam Diameter: Approximately 1.5 mm at the aperture
Beam Height from Base Plate: 24.8 mm
Polarization Ratio: Greater than 100:1
Pointing Stability: Less than 0.05 mrad after warm-up
Operating Temperature: 10 to 35°C
Power Supply: 90-264VAC or 5VDC (PSU-III-FDA, PSU-III-LED)
Modulation (Optional): TTL or analog, ranges from 1Hz to 30kHz
Expected Lifetime: 10,000 hours
Warranty: 1 year

Dimensions and Weight:

140.8(L)×73(W)×46.2(H) mm, 0.6 kg
154(L)×155(W)×95(H) mm, 1.5 kg
133(L)×130(W)×65(H) mm, 1.2 kg

Catalog excerpts

MIL-III-1064 / 1~1500mW DIODE PUMPED INFRARED SOLID-STATE LASER AT 1064nm Features - ultra compact - long lifetime - low owning cost - ease-to-use Applicaions - research - measurement - optical instrument - spectrum analysis Transverse mode Operating mode Power stability (rms, over 4 hours) Warm-up time (minutes) Beam divergence, full angle (mrad) Beam diameter 1/e2 at the aperture (mm) Beam height from base plate (mm) Polarization ratio Pointing stability after warm-up (mrad) Power supply (90-264VAC or 5VDC) Modulation (optional) Expected lifetime (hours) PhotonTec Berlin GmbH

Open the catalog to page 1

MIL-III-1064

MIL-III-1064

Catalog excerpts

All PhotonTec Berlin GmbH catalogs and technical brochures