*mydirectindustry

MGL-III-593.5

Product catalog summary

Product Overview: The document provides technical specifications for the 593nm DPSS Laser by PhotonTec Berlin GmbH. This laser is characterized by its all-solid-state design, ultra-compact form, long lifespan, ease of use, and low cost of ownership.

Key Features:

All solid-state laser with an ultra-compact design.
Long lifetime and ease of use.
Low cost of ownership.

Applications: The laser is suitable for optical sensors, spectrum analysis, instrumentation, measurement, and scientific research.

Specifications:

Dimensions: 154(L) × 155(W) × 95(H) mm, weight 1.5 kg.
Operating temperature: 10 - 35°C.
Warm-up time: Less than 10 minutes.
Pointing stability after warm-up: Less than 0.05 mrad.
Laser head dimensions: 141(L) x 73(W) x 46(H) mm, weight 0.6 kg.
Warranty: 1 year.
Polarisation ratio: Greater than 100:1.
Expected lifetime: 10,000 hours.
Beam divergence: Less than 1.5 mrad.
Beam diameter at the aperture: Approximately 2.0 mm.
Power stability: Less than 3%, 5%, or 10% (rms, over 4 hours).
Operating mode: Continuous wave.
Output power options: 5, 10, 20, 30 mW.
Transverse mode: TEM00.
Wavelength: 593.5 nm.

Additional Notes:

An OEM power supply unit is available.
Reduced lifetime if used improperly or above operating conditions.
A non-condensing environment is required for storage and operation below the ambient dew point.
Product specifications are subject to change without notice.

Catalog excerpts

The Photonics Solution Company 593nm DPSS Laser Features - All solid state laser - Ultra compact design - Long lifetime - Ease-to-use - Low cost ownership - Optical sensor - Spectrum analysis - Instrument - Measurement - Scientific research Operating mode continuous wave Transverse Mode Beam Divergence, Full Angle (mrad) Beam Diameter at the Aperture (mm) Power Stability (rms, 4 hours) Polarisation Ratio Warm-up time (minutes) Pointing stability after warm-up (mrad) Expected lifetime (hours) Laser head Power supply unit (Table Top, 90-260VAC) Notes: 1. An OEM power supply unit is available. 2. Reduced lifetime if improperly used or used above operating conditions. 3. A non-condensing environment is required for storage and operation below the ambient dew point. 4. Product specifications are subject to change without notice. PhotonTec Berlin GmbH Max-Planck-Str. 3 D- 12489 Berlin Germany

Open the catalog to page 1

MGL-III-593.5

MGL-III-593.5

Catalog excerpts

All PhotonTec Berlin GmbH catalogs and technical brochures