*mydirectindustry

MGL-FN-532

Product catalog summary

Product Overview:
The document provides technical specifications for a 532nm DPSS Laser, highlighting its features, applications, and operational parameters.

Key Features:

All solid-state laser design ensuring durability and reliability.
Low noise operation suitable for sensitive applications.
Long lifetime with proper usage.
Ease of use and low cost of ownership.

Applications:

Optical sensors and instruments.
Measurement and spectrum analysis.
Communication technologies.

Specifications:

Dimensions: 268mm (L) × 145mm (W) × 106mm (H), Weight: 2.6 kg.
Power Supply Unit: 238mm (L) × 146mm (W) × 102mm (H), Weight: 2.3 kg, Operating voltage: 90-260 VAC.
Operating temperature range: 10 - 35°C.
Warm-up time: Less than 15 minutes.
Pointing stability after warm-up: Less than 0.05 mrad.
Beam height from baseplate: 27.4 mm.
Beam divergence: Less than 1.5 mrad.
Beam diameter at the aperture: Approximately 2.0 mm.
Power stability: Less than 1%, 3%, or 5% (rms over 4 hours).
Operating mode: Continuous Wave.
Output power options: 100, 200, 300, 500, 800, 1000, 1200, 1400 mW.
Transverse mode: TEM00.
Wavelength: 532 nm.
Polarisation ratio: Greater than 100:1.
Expected lifetime: 10,000 hours.
Warranty: 1 year.

Operational Considerations:

Reduced lifetime if used improperly or beyond specified operating conditions.
Requires a non-condensing environment for storage and operation below the ambient dew point.
Specifications are subject to change without notice.

Contact Information:
PhotonTec Berlin GmbH, Max-Planck-Str. 3, D-12489 Berlin, Germany. Tel.: +49-30-83409380, Fax: +49-30-83409381, Email: [email protected], Website: www.photontec-berlin.com

Catalog excerpts

The Photonics Solution Company 532nm DPSS Laser Features - All solid state laser - Low noise - Long lifetime - Ease-to-use - Low cost ownership - Optical sensor - Optical instrument - Measurement - Spectrum analysis - Communication Operating mode Continuous Wave Transverse mode Beam divergence (full angle, mrad) Beam diameter at the Aperture (mm) Power stability (rms, 4 hours) Beam height (mm, from baseplate) Polarisation ratio Warm-up time (minutes) Pointing stability after warm-up (mrad) Expected lifetime (hours) Laser head Power Supply Unit (90-260 VAC) Notes: 1. Reduced lifetime if improperly used or used above operating conditions. 2. A non-condensing environment is required for storage and operation below the ambient dew point. 3. Product specifications are subject to change without notice. PhotonTec Berlin GmbH Max-Planck-Str. 3 D-12489 Berlin Germany

Open the catalog to page 1

MGL-FN-532

MGL-FN-532

Catalog excerpts

All PhotonTec Berlin GmbH catalogs and technical brochures