MBL-F-473

MBL-F-473

Product catalog summary
Product Overview: The document provides technical specifications for the 473nm DPSS Laser by PhotonTec Berlin GmbH, highlighting its features, applications, and operational parameters.
Features: The laser is described as an all-solid-state device with low noise, ultra-compact design, and ease of use. It is suitable for applications in biomedicine, biochemistry, Raman spectrum analysis, laser printing, display, and fluorescence sensing.
Specifications:
  • Amplitude noise: ~30% (rms, 1Hz – 20MHz)
  • Weight: 1.6 kg
  • Dimensions: 211.5 x 88 x 74 mm
  • Operating temperature: 10 - 35°C
  • Warm-up time: < 10 minutes
  • Polarisation Ratio: > 100:1
  • Expected lifetime: 10,000 hours
  • Beam divergence: < 1.5 mrad
  • Beam diameter at aperture: near TEM00
  • Power stability: <3%, <5%, <10% (rms, 4 hours @25°C)
  • Operating mode: Continuous Wave
  • Transverse mode: near TEM00
  • Output power: 200, 300, 400, 500, 600 mW
  • Wavelength: 473 ± 1 nm
Power Supply: The laser can be powered by PSU-H-FDA or PSU-H-LED units with display and knob.
Warranty and Lifetime: The product comes with a 1-year warranty and an expected lifetime of 10,000 hours, with a note that improper use or operation above specified conditions may reduce its lifespan.
Environmental Conditions: A non-condensing environment is required for storage and operation below the ambient dew point.
Additional Notes: Specifications are subject to change without notice.
See more

Catalog excerpts

MBL-F-473-1

The Photonics Solution Company 473nm DPSS Laser Features - All solid state laser - Low noise - Ultra compact - Easy-to-use - Biomedicine and biochemistry - Raman spectrum - Laser printing and display - Fluorescence sensor Operating mode Continuous Wave Transverse mode Beam divergence (full Angle, mrad) Beam diameter at the aperture (mm) Power stability (rms, 4 hours @25°C) Polarisation Ratio Warm-up time (minutes) Expected lifetime (hours) Laser head dimension, LxWxH, weight, kg Power supply unit 211.5 x 88 x 74 mm3 1.6 PSU-H-FDA or PSU-H-LED with display and knob Notes: 1. Reduced lifetime if improperly used or used above operating conditions. 2. A non-condensing environment is required for storage and operation below the ambient dew point. 3. Product specifications are subject to change without notice. PhotonTec Berlin GmbH Max-Planck-Str. 3 D- 12489 Berlin Germany

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.