- Catalogs
- PhotonTec Berlin GmbH
- High Brightness Fiber-coupled Diode Laser
High Brightness Fiber-coupled Diode Laser
High Brightness Fiber-coupled Diode Laser
- Available in 150W and 210W continuous wave (CW) output power.
- Fiber core options of 105µm and 200µm.
- Includes feedback protection for fiber laser pumping.
- Laser pumping.
- Material processing.
- Medical treatment.
- Pin 1: Laser diode +
- Pin 2: Laser diode -
- Pin 3: Photo diode (N)
- Pin 4: Photo diode (P)
- Pin 5 & 6: Thermistor
- Central Wavelength: 915 or 976 nm with a tolerance of ±10 nm.
- Spectral Width: Less than 3.0 nm for 90% power.
- Wavelength Temperature Coefficient: 0.3 nm/°C.
- Fiber Core Diameter: 105µm or 200µm with a numerical aperture of 0.22.
- Operating Current: 9.8 A for 150W and 15.0 A for 210W.
- Operating Voltage: 31.5 V for 150W and 30 V for 210W.
- Power Conversion Efficiency: 48% for 150W and 47% for 210W.
- Specifications and dimensions may change without notice.
- ESD precautions are necessary.
- Minimum fiber bend diameter should be 300 times the fiber core diameter.
- Improper use or operation above specified conditions may reduce lifetime.
- Non-condensing environment required for storage and operation below ambient dew point.
- This laser is an OEM version intended for integration into other equipment and does not comply with IEC and CDRH requirements. The customer is responsible for obtaining necessary certifications.
- Operating Temperature: 10°C to 40°C.
- Operating Humidity: Less than 75%.
- Storage Temperature: -20°C to +80°C.
- Soldering Temperature: 250°C for 10 seconds.
Catalog excerpts
Features - 150W and 210W CW output power - 105pm and 200pm fiber core - Feedback protection for fiber laser pumping Applications - Laser pumping - Meterial processing - Medical treatment PhotonTec Berlin GmbH Max-Planck-Str. 3 D-12489 Berlin Germany
Open the catalog to page 1
M9xx±10-150-F105/22-DK M9xx±10-210-F200/22-DK Optical Parameters Output Power Central Wavelength Wavelength Tolerance Spectral Width (90% power) Wavelength Temp. Coefficient 95% Engergy Fiber Parameters Fiber Core Diameter Numerical Aperture Bare Fiber Length Electric Parameters Threshold Current (typical) Operating Current (typical) Operating Voltage (typical) Slope Efficiency (typical) Power Conversion Efficiency (typical) Back Reflection Protection Wavelength Range Attenuation Other Parameters Operating Temperature* Operating Humidity Storage Temperature Soldering Temperature * 9xx - 915...
Open the catalog to page 2All PhotonTec Berlin GmbH catalogs and technical brochures
SMA905 Fiber Cable1 Page
MDL-III-808R1 Page
MIL-III-10641 Page
UV-F-3551 Page
MPL-F-2661 Page
MDL-III-980R1 Page
MDL-III-4501 Page
MDL-III-4051 Page
G785-600mWF-14BTF2 Pages
MSL-FN-4571 Page
G976-10WD-14HHL2 Pages
G830-1WF-02BCK2 Pages
G808-7WD-14HHL2 Pages
M793±3-8-F105/222 Pages
M635±3.5-D200/222 Pages
G808-3WF-4L2B-G3 Pages
MBL-F-4731 Page
MBL-N-4731 Page
MLL-F-4571 Page
MBL-N-4571 Page
MBL-F-4571 Page
MLL-W-4571 Page
MBL-W-4571 Page
MLL-N-4571 Page
MGL-N-532B1 Page
MGL-V-5321 Page
MGL-F-5321 Page
MLL-FN-4731 Page
MGL-III-593.51 Page
MLL-III-593.51 Page
PGL-V-H-5321 Page
MPL-III-5321 Page
MGL-FN-5321 Page
MSL-R-5321 Page
MSL-F-5321 Page
Blue solid state lasers1 Page
Diode Laser Mount2 Pages
- Copper cable
- Spectrometer
- Industrial cable
- Optical cable
- Optical data cable
- Pulsed laser
- Solid-state laser
- Visible laser
- Compact spectrometer
- Industrial laser
- Continuous wave laser
- Optical spectrometer
- Marking laser
- High-sensitivity spectrometer
- High-resolution spectrometer
- Laser for medical applications
- Diode-pumped laser
- Q-switched laser