Overview
The Kameleon CMOS color imaging sensor is designed for applications in Night Vision, Homeland Security, Surveillance, and Scientific fields. It offers superior color imaging across various light conditions, from daylight to low-light levels, without additional illumination.

Technical Specifications

• Resolution: 1280 × 1024 pixels
• Pixel Pitch: 9.7 µm × 9.7 µm
• Sensor Format/Diagonal: 14.8 mm x 12.74 mm / 16 mm
• Full Well Capacity: > 25000 e-
• Dynamic Range: > 60 dB
• Read Noise: < 4 e- mean in 100 Hz mode
• Quantum Efficiency: > 60% at peak
• Frame Rate: Up to 100 Hz with full field resolution
• Shutter Mode: Rolling

Features

• Image Lag: < 0.1%
• SNR: 42 dB
• Read-out Modes: Windowing Y-direction, X-Y mirroring, Multi-slope (Three slopes)
• Limiting Resolution: 51 lp/mm (1280 lines)
• PRNU: < 2% RMS
• Digital Video Output: 10-bit digital output (LDVS) up to full resolution

Environmental and Power

• Carrier: 73 pin PGA, 23 x 23 mm
• Power Consumption: < 425 mW @ 60 fps, < 450 mW @ 100 fps
• Operating Temperature: -40°C to 60°C
• Storage Temperature: -50°C to 80°C

Performance
The sensor provides excellent performance with a read-out noise below 4 e- without cooling, supporting frame rates up to 100 fps at full SXGA resolution. It is capable of capturing color images in extreme low light conditions (~100 mlx) or defaulting to monochrome images.

Quantum Efficiency
The Quantum Efficiency Curve indicates a peak efficiency of over 60% across wavelengths from 400 nm to 1100 nm, with specific efficiency levels for mono, blue, green, and red light.

Disclaimer
The information is believed to be accurate and reliable but is subject to change without notice. No liability is assumed for its use, and performance data represents typical characteristics as individual product performance may vary.