Catalogs >
Photonic Products >
UV COBRA Slim

UV COBRA Slim
6Pages

Catalog excerpts

Supplementary information Key Features • Design: Slim and compact • Field adjustable: focussing distance and diffusers • Chip-on-Board: Extreme brightness and high uniformity Crystal Clear Line Scan Images COBRA Slim Linescan Illuminators have been designed “from the chip up” for the extreme requirements of high-speed linescan and web inspection. LED-based COBRA Slim lines outperform halogen and fluorescent line illumination, while offering all of the many advantages of LEDs – long lifetime, controllability and increased • Modular: available in any length • Current monitoring & error detection • Wavelengths: from UV to Visible to IR (See relevant Datasheet for more information) Options Available an essentially unbroken line of semiconductor light source, resulting in • Strobing function (Potential for 5 times brighter) an extremely high level of uniformity.The combination of high intensity • Onboard Ethernet Control The chip-on-board (COB) approach to LED module fabrication yields and superior uniformity results in crystal clear linescan images. The ProPhotonix COB approach to LED module fabrication coupled with the engineering developments in thermal and optical design result in greater controllability and increased output power up to 4 million Lux. • Optical Intensity Feedback Key Applications Web and linescan inspection of: • Foil • Plastic fill • Paper • Currency • Semiconductors • Flat panel displays

Open the catalog to page 1

Focus & Illumination Field - 365nm COBRA Slim Lens Position Working Distance (WD) Range For Illuminance(1) (mm) Working Distance (WD) At Peak Intensity (mm) Line Width(2) (FWHM) For WD Range (mm) Line Width (FWHM) At Focal Distance (mm) Unit Length (1) For S1-S2 range is for 50% or higher intensity. For S3-S9 range is for 90% or higher intensity. (2) For more details on Line Width, see graph. (3) Positions S1 and S2 are divergent i.e. No focus, beam width increases with working distance. Position S3 produces the most collimated beam. 120 Beam Width Versus Working Distance - 365nm

Open the catalog to page 2

Beam Width Versus Working Distance - 395nm 100 Note: The behavior of Intensity with Working Distance will be similar for units with 3 or more modules

Open the catalog to page 3

Focus & Illumination Field - 395nm COBRA Slim Lens Position Working Distance (WD) Range For Illuminance(1) (mm) Working Distance (WD) At Peak Intensity (mm) Line Width(2) (FWHM) For WD Range (mm) Line Width (FWHM) At Focal Distance (mm) Unit Length (1) For S1-S2 range is for 50% or higher intensity. For S3-S9 range is for 90% or higher intensity. (2) For more details on Line Width, see graph. (3) Positions S1 and S2 are divergent i.e. No focus, beam width increases with working distance. Position S3 produces the most collimated beam.

Open the catalog to page 4

Part Numbers (8) PSU-24V-240W-XX.or comparable 24VDC standard power supply (9) Single power input connection COBRA Slim comes with a 2 metre power cable as standard.This is the only cable required to use the light at full intensity. This cable can be tailored to the specific application requirements. To order the power cable use the following part number C2-CAB-PWR-XXXX where XXXX is the length of the cable in cm.

Open the catalog to page 5

Dimensional Diagram 1. ALL DIMS IN mm. 2. ALL UNSPECIFIED TOLERANCES +/- 0.1mm UNLESS OTHERWISE STATED. 3. FINISHING: PART TO BE PRETREATED AS REQUIRED. TOLERANCES UNLESS OTHERWISE NOTED ANGLES ±0.5° .X ±0.1 .XX ±0.05 Ra = For all COBRA Slim longer than 100-mm, standard Item brand aluminium extrusion Profile 8 is used for rigidly aligning and connecting the 100-mm COBRA Slim modules together. The extrusion is also used for mounting the light . Two options are available (see dimensional specifications). To order your extrusion select the profile (SR1/SR2) - select the length of the COBRA...

Open the catalog to page 6