Catalogs >
Photonic Products >
SpecBright Line Lights

SpecBright Line Lights
4Pages

Catalog excerpts

SpecBright™ LED Line Lights Key Features • Extremely compact, and reliable • Chip-on-board technology • Superior uniformity • Modular for any length • Easy integration and mounting Extremely bright line scan LED illumination ProPhotonix SpecBright™ LED Line lights are uniquely uniform while maintaining a very high level of brightness not possible with conventional through-hole or surface mount LED based illuminators. This is achieved by placing up to 100 chip-on-board LEDs closely spaced in a 98-mm (3.88-in) line in a package designed for superior thermal management. This allows the LEDs to be driven to their potential, safely, for the longest possible lifetime and stability. For optimal performance, the light is focused in a narrowly divergent beam by Fresnel aspherically corrected optics to create an extremely bright and uniform output for short and medium working distances. In addition, SpecBright Line lights enable users to create a continuous line of any length. The power can be interconnected and the end caps removed to allow seamless light mixing between modules with touching lenses. These units are ideal for OEMs, system integrators and end users who require extremely compact and long lasting illumination sources for their high performance applications. Custom-engineered LED solutions are also available. • UV, visible, near-IR and white Applications • Linescan illumination • Linear backlight illumination Accessories • Power supplies • Current mode drivers • Heat sinks • Strobe drivers Options • UV, visible, near-IR and white • CW or pulsed mode

Open the catalog to page 1

Spectral Characteristics Colour Peak Wavelength / Colour Temperature Spectral Width FWHM Typical Illuminance at 100mm (kLux) Uniformity at 50mm (Horizontal FWHM (mm)) Typical Illuminance at 50mm (kLux) Uniformity at 50mm (Horizontal FWHM (mm)) Electrical Characteristics, Lifetime & Environment4 UV (370) Voltage mode (code”V”) Operating current at 24V mA Current mode (code”I”) Maximum operating current mA Mean Time before failure (MTBF) Hrs 1 Irradiance and illuminance of blue, white, UV and IR units, for working distances other than that shown above, may be computed with reference to the...

Open the catalog to page 2

Line Width FWHM (mm) Linewidth (mm) Wavelength (nm) Fig 1- Spectrum of available wavelengths. Note: Intensity (Wm-2nm-1) of LF1 unit at a working distance of 100mm Working Distance (mm) Working Distance (mm) Fig.2 - Line Width vs Working Distance for LF1 (Lensed) Working Distance (mm) Fig.3 Irradiance vs Working Distance for LF1 (Lensed) measured at maximum operating current (current mode) Working Distance (mm) Working Distance (mm) Fig.4 - Line Width Vs Working Distance for LN1 (No Lens) Working Distance (mm) Working Distance (mm) Fig. 5 Irradiance vs Working Distance for LN1 (No Lens)...

Open the catalog to page 3

Connectors / Flying Leads Controllers & Strobe Drivers • Tyco Mini Universal Mate-N-Lok connectors are available for 24VDC voltage configured lights (i.e. P/N LF1-630VXF100) and can be paired with the connectorized AC power adaptor (P/N PTS400-24C) for lab or bench top use. They provide a secure locking mechanism and reverse polarity protection. • Flying leads are standard for current source (I) modules. The Current Mode Power (CMP) controller drives SpecBright™ LED Illuminators, both constant current and 24VDC configured options. The CMP is a compact, DIN rail mountable controller...

Open the catalog to page 4