Catalogs >
Photonic Products >
SpecBright? LED Line Lights

SpecBright? LED Line Lights
4Pages

Catalog excerpts

Extremely bright line scan LED illumination ProPhotonix SpecBright™ LED Line lights are uniquely uniform while maintaining a very high level of brightness not possible with conventional through-hole or surface mount LED based illuminators. This is achieved by placing up to 100 chip-on-board LEDs closely spaced in a 98-mm (3.88-in) line in a package designed for superior thermal management. This allows the LEDs to be driven to their potential, safely, for the longest possible lifetime and stability. For optimal performance, the light is focused in a narrowly divergent beam by Fresnel aspherically corrected optics to create an extremely bright and uniform output for short and medium working distances. In addition, SpecBright Line lights enable users to create a continuous line of any length. The power can be interconnected and the end caps removed to allow seamless light mixing between modules with touching lenses. These units are ideal for OEMs, system integrators and end users who require extremely compact and long lasting illumination sources for their high performance applications. Custom-engineered LED solutions are also available. • Chip-on-board technology • Superior uniformity • Linescan illumination • Linear backlight • Power supplies • Current mode drivers • Heat sinks • Strobe drivers

Open the catalog to page 1

Spectral Characteristics Electrical Characteristics, Lifetime & Environment4 1 Irradiance and illuminance of blue, white, UVand IR units, for working distances other than that shown above, may be computed with reference to the Intensity vs Working Distance plot provided for the Red Linelight. Values computed in this manner are valid within ± 5% 2 Linewidths (FWHM) of blue, white, UV and IR units, for working distances other than that shown above, may be computed by extrapolating linearly from 3 Irradiance and Illuminance are measured at the centre of the illumination field, in continuous...

Open the catalog to page 2

Illumination Characteristics Spectrum of available wavelengths. Intensity (Wm 2nm') of LF1 unit at a working distance of 100mm Fig.2 - Line Width vs Working Distance for LF1 (Lensed) Fig.3 Irradiance vs Working Distance for LF1 (Lensed) measured at maximum operating current (current mode) Fig.4 - Line Width Vs Working Distance for LN1 (No Lens) Fig. 5 Irradiance vs Working Distance for LN1 (No Lens) measured at maximum operating current (current mode). Part Numbers NOTE: All measurements were taken in continuous(CW) mode Please contact us for other wavelengths. SpecBright LED Line light

Open the catalog to page 3

Connectors / Flying Leads Controllers & Strobe Drivers • Tyco Mini Universal Mate-N-Lok connectors are available for 24VDC voltage configured lights (i.e. P/N LF1-630VXF100) and can be paired with the connectorized AC power adaptor (P/N PTS400-24C) for lab or bench top use. They provide a secure locking mechanism and reverse polarity protection. • Flying leads are standard for current source (I) modules. The Current Mode Power (CMP) controller drives SpecBright™ LED Illuminators, both constant current and 24VDC configured options. The CMP is a compact, DIN rail mountable controller...

Open the catalog to page 4