Catalogs >
Photonic Products >
OEM Laser Threadmount Modules

OEM Laser Threadmount Modules
2Pages

Catalog excerpts

Laser Diode Modules The Threadmount laser modules produce a circular output beam of 2x2mm with output power of 0.9mW. Operating voltage is from 4.5V to 5.5V at currents from 35mA to 60mA. Beam divergence is <0.6mrad and operating temperature range is -10°C to +50°C. The modules consist of an aluminium housing, laser diode, drive circuit and collimating lens. Electrical connections are made via external flying leads. The lens is factory set to produce either a collimated beam or focused spot. The Threadmount range of circular beam laser diode modules has been designed as a complete and low cost laser diode • Complete laser diode system • High reliability • Circular output beam M^PRO PHOTONIX '?.>HB?%.O www.prophotonix.com

Open the catalog to page 1

Product Specifications Circular Output Beam Flying Lead Length Part Numbers To order your Threadmount Laser Diode Module use the product Code THR - Select Wavelength (XXX) - Select Power (XX). Threadmount Module PRODUCT CODE COMPLIES WITH Heat Sinking If the case temperature of the laser diode exceeds its maximum specification, premature or catastrophic failure may occur. To ensure the maximum life of the laser diode, it is recommended that an additional electrically insulated heatsink, of at least 10 sq.cm. be used. Thermal transfer cream can be used to improve contact and heat...

Open the catalog to page 2