Green 3D PRO Laser Mini
4Pages

{{requestButtons}}

Catalog excerpts

Green 3D PRO Laser Mini - 1

3D PRO Laser Mini Green™ Compact Structured Light Laser Key Features • 520nm direct emission laser diode module • Compact, 10mm diameter cylindrical housing • Lightweight • Excellent uniformity Seamless Integration, Excellent Uniformity. The 3D PRO Laser Mini GreenTM has been designed specifically for machine vision applications where space is restricted. These structured light lasers have a compact cylindrical form factor based on industry standard dimensions for easy integration into existing applications. • vailable options include: A power levels, fan angles, diffractive options , CW & TTL Modulation The 3D PRO Laser Mini Green™ is 10mm in diameter, compatible with the majority of existing machine vision systems. The laser is available with a customer-specified fixed focus. 3D PRO Laser Mini Green offers excellent uniformity with line widths down to 30µm at 120mm which is ideal for inspection applications that demand • Dimensional scanning a high degree of accuracy. They are available with fan angles between 10° and 90°. The 3D PRO Laser Mini range is available in a wide variety of line and diffractive optic options. • High precision alignment, pointing, positioning • Automated inspection

Open the catalog to page 1
Green 3D PRO Laser Mini - 2

Uniformity 3D PRO Laser Mini Green can deliver a range of uniformities dependent on customer requirements. The graph below shows a typical intensity profile along the length of a line and our method for defining the uniformity and beam angle. 3D PRO Laser Mini Green achieves a standard uniformity of ±22.5%. A higher uniformity option is available with a uniformity of ±12.5%. + α a1 at 80% line I : Optical power α -a1 2a0 : Fan angle Relative Intensity I(-a1,a1) : average intensity between (-a1,a1) Angle from Centre (a) Focusing and Depth of Focus performance The following graphs show the...

Open the catalog to page 2
Green 3D PRO Laser Mini - 3

Product Specifications Fan Angle Mechanical Specifications Weight Housing Material Anodized Aluminum Protection Category Electrical Isolation Potential-free Housing Bore Sighting Electrical and Environmental Specifications Input Voltage Other Diffractive Options are available on request Please Note: Power levels refer to maximum diode output power. Module output power will vary depending on optical configuration. Other wavelengths and diode power levels are available on request Input Current Optical Power Stability Single Line Automatic Power Control with current limiting & Direct current...

Open the catalog to page 3
Green 3D PRO Laser Mini - 4

D Sink Area Heat sink area 3D PRO Laser Mini Green E Third angle projection Pro Photonix Ltd Pierce Williams Sparrow lane Hatfield Broad Oak Hertfordshire. CM22 7BA United Kingdom www.prophotonix.com Part Numbers Pro Photonix Ltd own the copyright of this drawing / specification / document which is supplied in confidence and which without the express written consent of Pro Photonix Ltd must not be used for any other purpose other than for which it is supplied, must not be reproduced in any way in whole or in part nor information contained therein be reproduced or loaned in whole or in part....

Open the catalog to page 4

All Photonic Products catalogs and technical brochures

  1. COBRA

    4 Pages

  2. 3D Pro Laser

    4 Pages

  3. InViso Micro

    4 Pages

  4. COBRA Flex

    8 Pages

  5. COBRA? Max

    4 Pages

  6. COBRA Slim

    8 Pages

Archived catalogs