Technical Data UV LCD Tough for Prusa Research Compatible Printers Properties Impact Strength Low Tensile Modulus Soft Colours Orange Deep blue transparent Introduction This resin was developed by Photocentric using the Original Prusa SL1 for testing. Due to this fact, the SL1 was the main printer throughout the development process. It prints the resin fast while providing high print quality. The resins made for Prusa Research by Photocentric are among the best 405nm tough resins for 3D printing out there. Best Used for: Unique features • Functional or decorative parts • Tabletop gaming models and accessories Universal resin Vibrant colour Fast printing and high amount of details High definition Smooth surface finish UK Cambridge House, Oxney Rd, Peterborough, PE1 5YW email: [email protected] USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85353. email: [email protected]

Technical Data Resin Preparation prior to Print • Shake the resin bottle for 2 minutes before pouring it into the resin vat. • Stir resin in the vat with a vat cleaning tool for pigment drop out etc. before and between prints if the print is immediate and vat is not being emptied. The polymer should be poured into the vat away from direct sunlight. The polymer can be reused but should be poured through a filter to remove solid lumps. Keep the printer door closed to prevent accidentally curing resin. Properties Tensile Properties Tensile Modulus * Ultimate Tensile Strength * Shore Hardness * Water...