Technical Data Sheet General Properties Appearance Viscosity, 30 °C Viscosity, 50 °C Density Typical Values Cone/Plate Rheometer Cone/Plate Rheometer Tensile Properties Typical Values Ultimate Tensile Strength Flexural Properties Typical Values Flexural Modulus Flexural Strength Typical Values Notched Izod (Machined), -30 °C Notched Izod (Machined), 23 °C Charpy notched, 23 °C Impact Properties Thermal Properties Typical Values Typical Values Flammability Hardness Shore D 1) Determined with TA-Instrument DHR rheometer, cone/plate, diameter 60 mm, shear rate 100 s -1 The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. The safety data given in this publication is for information purposes only and does not constitute a legally binding MSDS. The relevant MSDS can be obtained upon request from your supplier or you may contact BASF 3D Printing Solutions GmbH directly at [email protected]. Version 2.0 BASF 3D Printing Solutions GmbH Photocentric UK - Cambridge House, Oxney Road, Peterborough, PE1 5YW. +44 1733 349937. [email protected] USA - 2205 West Parkside Lane, Phoenix, 85027, AZ. (623) 581-3220. [email protected]