Catalogs >
Photocentric Group >
HighTemp DL400

HighTemp DL400
2Pages

Catalog excerpts

Technical Data HighTemp DL400 Full size motorcycle fuel tank Colours Amber Liquid Crystal Introduction Photocentric’s HighTemp DL400 is the first Photocentric high temperature resistant resin possessing superior properties of both strength and stiffness. It can handle impact, compression, fatigue, high temperatures and moisture without bending or deforming, able to print with an impressive layer thickness of 350µm. Best Used for: • • • • Hot fluid and gas manifolds Moulds and inserts Heat resistant housings and fixtures Outdoor applications Unique Features: • • • • • • Temperature resistant (Heat Deflection Temperature of 230°C) Excellent long-lasting performance under heat and stress Able to print with an impressive layer thickness of 350µm. Simulating the strength and stiffness of glass filled Nylon 6 Dry and Smooth surface finish and ability to print fine details Minimal shrinkage UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email: info@photocentric.co.uk USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85353 email: info@photocentricusa.com

Open the catalog to page 1

Technical Data Post Processing Processing Instructions • To print with Photocentric Liquid Crystal Magna, choose ‘HighTemp DL400’ and the desired layer thickness when preparing your print file in Photocentric Studio. Heat the resin to 60°C for 5 hours or until the resin is fully liquified in the bottle. Failure to do so prior to printing will result in the resin crystalizing, leading to print failures. Shake the resin bottle for 2 minutes before pouring into the resin vat. Parts can be washed in 15 minutes using Photocentric Resin Cleaner or alternatively, in 10 minutes using Photocentric...

Open the catalog to page 2

HighTemp DL400 2Pages

Catalog excerpts

All Photocentric Group catalogs and technical brochures

HighTemp DL400
2Pages