Durable UV80TR (Translucent)
6Pages

Technical Data Durable UV80TR (Translucent) Reactor chamber Compatible Printers UV LCD & DLP 3D Printers Liquid Crystal Colours Translucent Introduction Photocentric’s Durable range is the most versatile material of the Photocentric functional materials. Durable UV80 is similar to ABS in its ability to resist impact, compress, bend and stress fatigue without breaking or deforming. Photocentric Durable UV80TR works with a variety of UV LCD and DLP 3D printers, as well as the Photocentric Liquid Crystal Opus printer. Jigs and fixtures requiring minimal deflection Cover-plates and enclosures Fastenings, tools and couplings Suitable for end use parts Tough, durable, and long-lasting Simulating the strength and stiffness of ABS Smooth surface finish Translucent finish suitable for micro-reactors UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email: info@photocentric.co.uk USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85353 email: info@photocentricusa.com www.ph

Technical Data Properties Tensile Properties Tensile Modulus * Tensile Strength (Break) * Tensile Strength (Yield) * Elongation at break * ASTM D638 ASTM D638 ASTM D638 ASTM D638 Shore Hardness * Heat Deflection Temperature* Water absorption (%)* after 24 hrs Water absorption (%)* after 72 hrs 90 Shore D 76°C 0.8 Available Upon Request ASTM D2240 ASTM D648 Internal Internal Water absorption (%)* after 7 days Available Upon Request Flexural Properties Flexural Strength * Flexural Modulus * Impact Properties Impact Strength Notched Izod * General Properties * Mechanical properties stated...

Technical Data Design Consideration Parameters These are example parameters in relation to a UV LCD printer with 81um XY resolution. Minimum feature size (pins) Minimum hole diameter Minimum slot thickness Minimum wall thickness Successful for overhangs ≤60° with no support Parts fit with resistance at 1mm Click to view sample Parts fit perfectly with no resistance at 0.06mm offset Click to view sample Minimum wall thickness unsupported Minimum wall thickness un supported is 2mm with maximum height of 80mm. Scaling factor UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email:...

Technical Data Recommended Support Parameters & Orientation: These are recommended support settings in relation to a UV LCD printer with 81um XY resolution. Large Models Diagram reference numbers Small Models Values Pole Widening Factor Pole Widening Factor Model Height from Base (mm) Model Height from Base (mm) Height of Support Foot (mm) Height of Support Foot (mm) Bottom of Foot Diameter (mm) Bottom of Foot Diameter (mm) • Recommended orientation around all axes is 45° UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email: info@photocentric.co.uk USA Avondale 107 - Building ‘A’...

Technical Data Printer and Resin Profiling Photocentric UV Printers • To print with Photocentric UV printers, choose ‘Durable UV80TR’ and the desired layer thickness when preparing your print file in Photocentric Studio. Photocentric UV high-performance resins have been formulated to be compatible with a wide range of 3rd Party Printers. This list is continually updated, for the most up-to-date information, please visit our UV Resin Compatibility Page. All resins are functional at a wavelength of 385-405 nm. Please see below instruction on how to calculate appropriate exposure time with...

Technical Data Resin Preparation prior to Print • Heat the resin to 30°C in the bottle. Shake the resin bottle for 2 minutes before pouring into the resin vat. Post-Processing To reach the full mechanical properties of the material, parts printed using UV Durable UV80TR resin will need to be post-processed. 1. Remove the print platform from the printer and place in to the wash unit. You can use ‘Photocentric Wash15’ or ‘Photocentric Air Wash L’ as Wash units. Follow resin cleaner/solvent TDS for relevant wash cycles. You can use ‘Photocentric Resin Cleaner’s as the cleaning mediums. For...