Technical Data Daylight Magna Hard Electronic Housing Compatible Printers Properties Tensile Modulus Low Liquid Crystal Colours Black Introduction Photocentric’s Daylight Magna Hard formulation is ideal for making large-scale objects displaying extreme hardness with no compression under high force, negligible plastic deformation due to yield strength before breaking and minimal shrinkage over varied areas. Parts also exhibit exceptionally high tensile properties with reasonable elongation. Best Used for: Unique Features: • Printing large functional parts • Mass manufacture of custom end-use parts • Prototyping • High Accuracy • Strong, tough and long-lasting UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN email: [email protected] USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85323 email: [email protected] www.photocen

Technical Data Processing Instructions Post Processing • To print with Photocentric Liquid Crystal Magna, choose ‘Hard Black’ and the desired layer thickness when preparing your print file in Photocentric Studio. • Heat the resin to 30°C in the bottle. • Shake the resin bottle for 2 minutes before pouring into the resin vat. • Parts can be washed in 15 minutes using Photocentric Resin Cleaner or alternatively, in 10 minutes using Photocentric Resin Cleaner 30. • Once washed, rinse with warm water for 2 minutes • Dry with compressed air to remove any remaining water. Or alternatively, leave to...