Technical Data Daylight Magna Duramax Bike Saddle Compatible Printers Properties Impact Strength Low Liquid Crystal Tensile Modulus Soft Colours Black Introduction Photocentric’s Daylight Magna Duramax formulation has been created for manufacturing functional parts that are durable and long lasting with high impact strength. Parts are stiff but can flex under strain, and quickly returning to their original form. Best Used for: • • • • Jigs and fixtures requiring minimal deflection Cover-plates and enclosures Fastenings, tools and couplings Suitable for end-use parts Unique Features: • • • • Smooth surface finish Tough, durable and long-lasting Exhibits intricate details High strength and stiffness UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email: [email protected] USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85353 email: [email protected] www.ph

Technical Data Post Processing Processing Instructions • To print with Photocentric Liquid Crystal Magna, choose ‘Duramax’ and the desired layer thickness when preparing your print file in Photocentric Studio. Heat the resin to 30°C in the bottle. Shake the resin bottle for 2 minutes before pouring into the resin vat. Parts can be washed in 15 minutes using Photocentric Resin Cleaner or alternatively, in 10 minutes using Photocentric Resin Cleaner 30. Once washed, rinse with warm water for 2 minutes Dry with compressed air to remove any remaining water. Or alternatively, leave to air-dry. Place...