Technical Data Daylight Magna Draft Fluid Manifold Compatible Printers Properties Impact Strength Low Liquid Crystal Print Speed Slow Colours Turquoise Introduction Photocentric’s Draft resin is our fastest printing resin yet. Specifically designed to allow for detailed large parts to be printed in shorter times for rapid prototyping and production. This resin works up to a 350µm layer height, with short curing times- reducing print times dramatically. Best Used for: • • • Ideal for prototyping Fast printing Translucency allows for easy inspection of hollowed parts Unique Features: • • • Printed parts exhibit very high strength Resilient with little compression Fast post curing UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email: [email protected] USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85353 email: [email protected] www.photo

Technical Data Post Processing Processing Instructions • To print with Photocentric Liquid Crystal Magna, choose ‘Draft’ and the desired layer thickness when preparing your print file in Photocentric Studio. Heat the resin to 30°C in the bottle. Shake the resin bottle for 2 minutes before pouring into the resin vat. Parts can be washed in 15 minutes using Photocentric Resin Cleaner or alternatively, in 10 minutes using Photocentric Resin Cleaner 30. Once washed, rinse with warm water for 2 minutes Dry with compressed air to remove any remaining water. Or alternatively, leave to air-dry. Place...