Technical Data Daylight Magna Dental Model Beige Magna Platform pictured shows 48 x Aligner Models Compatible Printers Liquid Crystal Shore Hardness Colours Beige Introduction Photocentric Magna Dental Model Beige has been specially created for 3D printing highly detailed and accurate dental models. It provides outstanding accuracy with at least 90% of scanned models within ±100µm tolerance, perfect for Aligner Dental Model production. Using Magna Dental Model Beige ensures a dry surface finish, accurate detail and great mechanical stiffness, shorter print and post process cycles with a high Shore hardness of 84D. Best Used for: • • • Orthodontic models for clear aligner manufacture Study, opposing and denture base dental models Thermoforming High accuracy Crisp definition High stiffness and hardness Easy to print and post process UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email: [email protected] USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85353 email: [email protected] www.phot

Technical Data Post Processing Processing Instructions • To print with Photocentric Liquid Crystal Magna, choose ‘Dental Model Beige’ and the desired layer thickness when preparing your print file in Photocentric Studio. Heat the resin to 30°C in the bottle. Shake the resin bottle for 2 minutes before pouring into the resin vat. Parts can be washed in 15 minutes using Photocentric Resin Cleaner or alternatively, in 10 minutes using Photocentric Resin Cleaner 30. Once washed, rinse with warm water for 2 minutes Dry with compressed air to remove any remaining water. Or alternatively, leave to air-dry....

Technical Data Daylight Magna Dental Model White Magna Platform pictured shows 48 x Aligner Models Compatible Printers Liquid Crystal Shore Hardness Soft Colours White Introduction Photocentric Magna Dental Model White has been specially created for 3D printing highly detailed and accurate dental models. It provides outstanding accuracy and minimal shrinkage with at least 80% of scanned models within ±100µm tolerance, perfect for Aligner Dental Model production. Using Magna Dental Model White ensures a dry surface finish, accurate details, and great mechanical stiffness with a high Shore hardness...

Technical Data Post Processing Processing Instructions • To print with Photocentric Liquid Crystal Magna, choose ‘Dental Model White’ and the desired layer thickness when preparing your print file in Photocentric Studio. Heat the resin to 30°C in the bottle. Shake the resin bottle for 2 minutes before pouring into the resin vat. Parts can be washed in 15 minutes using Photocentric Resin Cleaner or alternatively, in 10 minutes using Photocentric Resin Cleaner 30. Once washed, rinse with warm water for 2 minutes Dry with compressed air to remove any remaining water. Or alternatively, leave to air-dry....