Technical Data Daylight Magna Concept Compatible Printers Properties Tensile Modulus Low Liquid Crystal Colours Green Introduction Photocentric’s Daylight Magna Concept Green has been designed for producing rigid highly detailed prototyping parts. Printed parts display high tensile strength, durability, crisp definition, and high accuracy. Best Used for: • • Rigid and accurate prototypes Intricate models and figurines Unique Features: • • • High tensile modulus High definition Smooth surface finish, allowing for a variety of primer paints to be applied UK Titan House, 20 Titan Drive, Peterborough, PE1 5XN. email: [email protected] USA Avondale 107 - Building ‘A’ 855 N. 107th Ave., Suite A110, Avondale, Arizona 85353 email: [email protected] www.photocen

Technical Data Post Processing Processing Instructions • To print with Photocentric Liquid Crystal Magna, choose ‘Concept Green’ and the desired layer thickness when preparing your print file in Photocentric Studio. It is recommended to print models which do not take longer than 12hrs to print at 100 µm layer thickness or with no build height greater than 150mm at any desired layer thickness. Heat the resin to 30°C in the bottle. Shake the resin bottle for 2 minutes before pouring into the resin vat. Parts can be washed in 15 minutes using Photocentric Resin Cleaner or alternatively, in 10 minutes...