MYOTIS 1300 SENSOR AND SIGNAL CONDITIONER
3Pages

MYOTIS 1300 SENSOR AND SIGNAL CONDITIONER Phonoptics manufactures fiber optic sensors for use in harsh environments. Within the framework of its developments, Phonoptics offers its know-how in terms of optical sources. In order to use Phonoptics fiber optic sensors, it is necessary to use electronics that provide the optical signal and its analysis. An integrated thermistor provides protection in case of overheating. The rear LED indicates whether a sensor is present and functional. This Myotis1300 version also allows the amplification of the signal with a gain on 3 levels, the use of headphones and the BNC AC output, an SMA DC output for monitoring the integrity of the sensor, and a digital output type USB daq 44kHz 16bit. All these outputs can be used simultaneously. Standard and convenient inputs/outputs For any Phonoptics sensor Sensor integrity check output Optical connector E2000 APC with protective flap Integrated scanner Integrates a battery The LED on the front panel indicates in red if the µUSB power cable is connected (and therefore the battery is recharging), and indicates in green if the unit is in the ON position. An integrated circuit optimizes the recharging and the power supply of the unit according to the needs and capacities of the charger. CONTACT US 8 Rue Jean Mermoz, 91080 Évry-Courcouronnes The connector has a protective metal flap that prevents dust intrusion and laser light from leaving the housing when the microphone is not plugged in, thus ensuring optimum safety

Detailed specifications USB Type C digital output DC output SMA 0-10V 5V input μUSB On/off button Capteur de présence indicatif à LED E2000 I/O Optique 3.5mm jack audio output BNC output AC -10V+10V GAIN x1 x10 x100 Power LED CONTACT US 8 Rue Jean Mermoz, 91080 Évry-Courcouronnes

Detailed specifications Conditioner Sensitivity Microphone 100mV/Pa (measured at 1 kHz, 94dB, gain set at center)100mV/Pa (measured at 1 kHz, 94dB, gain set at center)100mV/Pa (measured at 1 kHz, 94dB, gain set at center) Temperature storage Signal-to-noise ratio 70dB (measured at 1kHz, (SNR) 94dB, gain set to center) Invar (others on request) 1200 mAh; approx. 8 hours of autonomy fiber optics Dimension Bare fiber (ɸ250 μ m buffer), sheath 900 μ m or fiber optic cable ( ɸ 2mm, 3mm, metal) Type Radius of min curvature G150/125 (other on request) 5 mm instantaneous, 40 mm long lasting CONTACT...