General Specifications:
The LAMBDA actuator offers a maximum force of 6000 N for pushing and 4000 N for pulling. It features a speed adjustment capability of up to 38 mm/s and a stroke length ranging from 15 mm to 600 mm. The installation dimension varies based on the stroke length, with specific measurements provided for strokes less than and greater than 400 mm. The duty cycle is 10% over 20 minutes, and the device supports synchronous operation with a control unit. It operates on a supply voltage of either 12VDC or 24VDC and includes an integrated limit switch with optional end position signaling. The protection class is IP66 (static), and it is self-locking up to the nominal load. The ambient temperature range is from -20°C to +60°C.

Components:
The rod and housing ends are made of POM with a hole diameter of 12.1 mm. The lift tube is constructed from stainless steel, and the housing is made of black POM. Connection options include an Amphenol 6-pole or Hrischmann GDM connector, with cable lengths of 1.5m or 3m. Additional options include individually selectable suspensions and special strokes adjustable ex works.

Technical Drawing:
The technical drawing provides detailed dimensions for various versions of the actuator, including dimensions A, B, and C for strokes ranging from 100 mm to 600 mm. The drawing also indicates that the suspension can be rotated by 90°.

Performance Data:
The performance data is provided for three different executions based on force: 2000N, 4500N, and 6000N. Each execution includes data on current (I) and speed (v) for both 12VDC and 24VDC. The data highlights the relationship between current, speed, and force, with specific values provided for each execution.