*mydirectindustry

Data sheet LD75

Product catalog summary

General Specifications
The LD75 actuator has a maximum force of 750 N and a speed adjustment capability of up to 50 mm/s. It offers a stroke length ranging from a minimum of 20 mm to a maximum of 130 mm, with an installation dimension of 245 mm. The duty cycle is rated at 30%, and position feedback is available as an optional feature. The actuator operates on a supply voltage of either 12VDC or 24VDC and includes an integrated limit switch. An end position signal is also optional. It is designed with a protection class of IP69K when static and is self-locking at push up to the nominal load and at pull 400N. The storage temperature range is from -40°C to +85°C.

Components and Materials
The rod end is made of stainless steel with a hole diameter of 10.1 mm, while the housing end is constructed from die-cast aluminum with the same hole diameter. The lift tube material is stainless steel, and the housing is made from die-cast aluminum, colored similarly to RAL 7024, graphite gray. The connection is facilitated through a cable available in lengths of 1.5m, 3m, or 5m.

Options and Additional Features
The actuator offers individually selectable suspensions and special strokes that can be adjusted ex works. Control and regulation are managed through voltage polarity, and position feedback is provided via a potentiometer.

Catalog excerpts

TECHNICAL DATA: General Data Force Speed adjustment Stroke length Duty cycle Position feedback Supply voltage Intergrated limit switch Protection class At push up to nominal load at pull 400N Storage temperature Stainless steel, hole 10.1mm Die-cast aluminum hole 10.1mm Lift tube material Stainless steel Housing material Die-cast aluminum Housing colour Similar to RAL 7024, graphite gray Cable length Suspensions individually selectable Special strokes adjustable ex works More data Control / Regulation Voltage polarity Position feedback Phoenix Mecano Solutions AG | Hofwisenstrasse 6 | CH-8260 Stein am Rhein Phone: +41 52 742 75 00 | Email: [email protected] | Internet: www.phoenix-mecano.ch

Open the catalog to page 1

TECHNICAL DRAWING: Phoenix Mecano Solutions AG | Hofwisenstrasse 6 | CH-8260 Stein am Rhein Phone: +41 52 742 75 00 | Email: [email protected] | Internet: www.phoenix-mecano.ch

Open the catalog to page 2

PERFORMANCE DATA Phoenix Mecano Solutions AG | Hofwisenstrasse 6 | CH-8260 Stein am Rhein Phone: +41 52 742 75 00 | Email: [email protected] | Internet: www.phoenix-mecano.ch

Open the catalog to page 3

Phoenix Mecano Solutions AG | Hofwisenstrasse 6 | CH-8260 Stein am Rhein Phone: +41 52 742 75 00 | Email: [email protected] | Internet: www.phoenix-mecano.ch

Open the catalog to page 4

Phoenix Mecano Solutions AG | Hofwisenstrasse 6 | CH-8260 Stein am Rhein Phone: +41 52 742 75 00 | Email: [email protected] | Internet: www.phoenix-mecano.ch

Open the catalog to page 5

Data sheet LD75

Data sheet LD75

Catalog excerpts

All Phoenix Mecano Solutions AG catalogs and technical brochures