General Specifications:
The LD1000E actuator has a maximum force of 10,000N and a speed adjustment capability of up to 24mm/s. The stroke length ranges from a minimum of 15mm to a maximum of 1000mm. Installation dimensions vary based on stroke length, with specific measurements provided for strokes less than and greater than 400mm. It is certified under NRTL standards, specifically UL 61800-5-1:2012/R:2021-02 and CSA C22.2 No. 274:2017, and has a duty cycle of 30%. Optional features include position feedback and end position signals. The actuator operates on a supply voltage of either 12VDC or 24VDC and includes an integrated limit switch. It is rated with a protection class of IP69K (static) and is self-locking up to the nominal load. The storage temperature range is from -40°C to +85°C.

Material and Construction:
The rod end and housing end are made of stainless steel with a hole diameter of 12.1mm. The lift tube is also stainless steel, while the housing is constructed from die-cast aluminum with an anodized aluminum profile, colored similarly to RAL 9005 black. The stroke pipe is stainless steel, and the connection is via an M12 connector with cable lengths available in 3m, 5m, and 10m.

Control and Monitoring:
Control is achieved through a change of polarity, with options for hand switch and PLC. Position feedback is available as both potential bound and potential-free. Monitoring includes current limitation.

Technical Drawing and Measurements:
The document includes a technical drawing with detailed measurements for various stroke lengths, providing specific dimensions for measures A and B corresponding to each stroke length from 100mm to 1000mm.

Performance Data:
The document concludes with performance data, although specific details are not provided in the text.