PHLOX_STROBE_LIGHT
1Pages

PHLOX® STROBE LIGHT Phlox® Strobe light Expected Life Input Voltage Input Current Max 48 VDC (continuous mode) 5 A (continuous mode) 30 A (pulsed mode) Max pulse width 10 ms Min pulse width 5 μs Max frequency: 5KHz Trigger signal 5 to 24 VDC width pulse 5 μs Delay between trigger and pulse rise < 4 μs Pulse width knob: width decreases if turned in a clockwise direction. Pulse width can be set between 5μs and 10ms Outer unit L x W x H with buttons und (PS +24 V (P ) S) M Gro ax : und 48V (lig DC Live ht) wir Volt e (ligh t) age of t Gro und he pot ent iom Volt ete age r (2 of t ) 5 to he p 24 V ote ntio DC trig me ter ger (1) Housing Material Weight Light intensity knob: intensity decreases if turned in a clockwise direction; (2) Pulse width can also be controlled by applying a voltage between 0 and 5 VDC, after setting the potentiometer to zero. PHLOX STROBE LIGHT can be used as a dimmer. Before connecting the PSU, turn the Pulse Width knob (left one) all the way down clockwise; then connect the PSU, the green LED will go on and then you can adjust the light intensity by turning the right knob up or down. PHLOX STROBE LIGHT can be used as a strobe light. Before connecting the PSU, turn the Pulse Width knob (left one) all the way counterclockwise;then connect the PSU, the blue LED will go on and then you can adjust the pulse width from 5μs up to 10ms with the left knob, and the light intensity with the right knob. New Phlox® STROBE LIGHT Environmental Max. Operating Humidity 60% non-condensing Operating Temperature 50°C (122°F) max StorageTemperature 60°C (140°F) max Shelf life 12 months from date of purchase Product key: PHLOX STROBE LIGHT Do not cover the device when it's switched on. Accessories • Power supply: 110V and 220V ALIM-STROBLIGHT-EU or ALIM-STROBLIGHT-US RoHS directive compliant Each PHLOX STROBE LIGHT is provided with: - 24 months warranty creation@libertad.fr A very compact and easy-to-use LED strober. PHLOX Corp. • Lot n° 8, Rue Louis Berton, Quartier de l'Enfant - ZAC du Quartier 13100 AIX-EN-PROVENCE - FRANCE • Phone : +33 (0)4 42 90 76 20 - e-mail: info@phlox-gc.com Subject to change - Non contractual document (1) Light intensity can also be controlled by applying a voltage between 0 and 5 VDC, after setting the potentiometer