*mydirectindustry

LUXEON M

Product catalog summary

General Product Information
LUXEON M is a high-performance LED designed for outdoor and industrial applications, offering high efficiency and low cost. It ensures color consistency with a 3- or 5-step MacAdam ellipse centered in ANSI.

Features and Benefits

Uniform image for tight beam control in applications like MR16 and spotlights.
High flux density from a 3mm² area, enabling compact fixture designs.
Available in 11.2V, 5.6V, and 2.8V packages for high performance with efficient drivers.
Exceeds ENERGY STAR® lumen maintenance requirements.

Product Test Conditions
Tested with a DC drive current of 700mA for 12V, 1400mA for 6V, and 2800mA for 3V at a junction temperature of 85ºC.

Part Number Nomenclature
Part numbers indicate minimum CRI, voltage, color, CCT, and minimum luminous flux.

Environmental Compliance
Compliant with RoHS and REACH regulations, avoiding hazardous substances like lead and mercury.

Performance Characteristics
Includes tables of luminous flux, CRI, and test currents for various CCTs and voltages.

Optical Characteristics
Typical total included angle is 140°, and the viewing angle is 120°.

Electrical and Thermal Characteristics
Forward voltage ranges from 2.63V to 11.70V, with a typical thermal resistance of 1.25°C/W.

Absolute Maximum Ratings

DC Forward Current: Up to 4800mA depending on the model.
Operating temperature: -40°C to 135°C.
Soldering temperature: 260°C with up to 3 reflow cycles.

Characteristic Curves
Includes graphs for spectral power distribution, light output vs. junction temperature, and forward current characteristics.

Packaging Information
Details on pocket tape and reel dimensions for packaging.

Specifications and Performance
Detailed specifications for the LUXEON M LED series, including forward current vs. forward voltage characteristics at a junction temperature of 85ºC, and typical radiation patterns at test currents.

Product Bin and Labeling Definitions
LED components are categorized based on luminous flux, color point, and forward voltage. White LEDs use a four-digit CAT code, while Royal Blue LEDs use a three-digit code.

Luminous Flux and Radiometric Power Bins
Tables outline the luminous flux bins for white LEDs and radiometric power bins for Royal Blue LEDs, with a tolerance of ±6.5% on measurements.

Color Bin Definition
Color bins are defined using 3- and 5-step MacAdam ellipses for various CCTs, with a tolerance of ±0.005 on CIE 1931 color space coordinates.

Forward Voltage and Dominant Wavelength Bins
Forward voltage bins are specified for different LED models, with a tolerance of ±0.06V. Dominant wavelength bins for Royal Blue LEDs are also provided, with a tolerance of ±0.5nm.

Mechanical Dimensions
Mechanical dimensions for the LUXEON M series are provided in millimeters.

Reflow Soldering Guidelines
Includes a reflow profile for lead-free assembly, detailing temperature and time requirements for optimal soldering.

Moisture Sensitivity
Moisture sensitivity levels are outlined according to JEDEC standards, specifying floor life and soak requirements.

Solder Pad Design and Packaging Information
Recommended PCB solder pad layouts and packaging dimensions, including pocket tape and reel dimensions, are provided for proper handling and assembly.

Disclaimer and Company Information
Lumileds disclaims liability for data accuracy and reserves the right to make changes without notice. The company is a leader in LED technology, focusing on innovation and quality in lighting solutions.

Catalog excerpts

GENERAL ILLUMINATION LUXEON M Brightest, most uniform and highest efficacy multi-die emitter LUXEON M is an illumination grade multi-die LED designed to enable outdoor and industrial applications targeting either high efficiency or low cost. With Freedom from Binning and leading performance, LUXEON M falls within a single 3- or 5-step MacAdam ellipse centered in ANSI to ensure color consistency from LED to LED, delivering high efficacy and high flux density from a uniform source with tight correlated color temperature control. The superior quality of light, volume of lumens, and real world efficacy enable leading performance and efficient solution development in a wide variety of lighting segments. PRIMARY APPLICATIONS Uniform image enables tight beam control in MR16 and spotlight applications High flux density from a 3mm area enables reduced emitter count and compact fixture designs 11.2V, 5.6V and 2.8V package options puts high performance within reach with high efficiency and low cost drivers Leading thermal resistance allows flexible system design to optimize for lm/$ and lm/W 2 Exceeds ENERGY STAR® lumen maintenance requirements Architectural Downlights High Bay & Low Bay Lamps Outdoor Specialty Lighting Spotlights DS103 LUXEON M Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 1

Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . ....

Open the catalog to page 2

General Product Information Product Test Conditions LUXEON M LEDs are tested and binned with a DC drive current of 700mA for LUXEON M 12V, 1400mA for LUXEON M 6V and 2800mA for LUXEON M 3V at a junction temperature, Tj, of 85ºC. Part Number Nomenclature Part numbers for LUXEON M follow the convention below: L X R A – B C D D – E E E E Where: A – designates minimum CRI (7=70, 8=80, 9=90, 0=Royal Blue) – designates color (W=White, R=Royal Blue) E E E E – designates minimum luminous flux (optional) Therefore, the following part number is used for a white LUXEON M 12V 3000K 80CRI: L X R 8 – S W 3...

Open the catalog to page 3

Performance Characteristics Product Selection Guide Table 1a. Product performance for LUXEON M White at test current, Tj=85°C. 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 4

Optical Characteristics Table 2. Optical characteristics for LUXEON M at test current, Tj=85°C. 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 5

Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON M. PARAMETER MAXIMUM PERFORMANCE 1200mA for LXRx-SWxx 2400mA for LXRx-RWxx 4800mA for LXRx-QWxx 1050mA for LXRx-Sxxx 2100mA for LXRx-Rxxx 4200mA for LXRx-Qxxx Peak Pulsed Forward Current [3] 1375mA for LXRx-SWxx 2750mA for LXRx-RWxx 5500mA for LXRx-QWxx 1200mA for LXR0-SR00 2400mA for LXR0-RR00 4800mA for LXR0-QR00 LED Junction Temperature (DC & Pulse) < 8000V Human Body Model (HBM) Class 3A per JEDEC JS-001-2012 Operating Case Temperature Storage Temperature Soldering Temperature Allowable Reflow Cycles Reverse Voltage (Vreverse)...

Open the catalog to page 6

Characteristic Curves Spectral Power Distribution Characteristics Figure 2a: Typical normalized power vs. wavelength for LXR7-xWxx at test current, Tj=85°C. Figure 2b: Typical normalized power vs. wavelength for LXR8-xWxx at test current, Tj=85°C. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 7

Figure 2c: Typical normalized power vs. wavelength for LXR9-xWxx at test current, Tj=85°C. Figure 2d: Typical normalized power vs. wavelength for LXRO-xROO at test current, Tj=85°C. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 8

Light Output Characteristics Figure 3: Typical normalized light output vs. junction temperature for LXRx-xxxx at test current, Tj=85°C. Figure 4a: Typical normalized light output vs. forward current for LXRx-Sxxx at test current, Tj=85°C. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 9

Figure 4b: Typical normalized light output vs. forward current for LXRx-Rxxx at test current, Tj=85ºC. Figure 4c: Typical normalized light output vs. forward current for LXRx-Qxxx at test current, Tj=85ºC. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 10

Forward Current Characteristics Figure 5a: Typical forward current vs. forward voltage for LXRx-Sxxx at Tj=85°C. Figure 5b: Typical forward current vs. forward voltage for LXRx-Rxxx at Tj=85°C. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 11

Open the catalog to page 12

Radiation Pattern Characteristics Figure 6: Typical radiation pattern for LXRx-xxxx at test current, Tj=85ºC. Figure 7: Typical polar radiation pattern for LXRx-xxxx at test current, Tj=85ºC. DS103 LUXEON M Product Datasheet 20150625 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 13

Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, forward voltage, and color point, peak wavelength, or dominant wavelength. Reels with LUXEON M White LEDs are labeled using a four-digit alphanumeric CAT code following the format below: A B C D A designates luminous flux bin (example: M=630 to 680 lumens, T=970 to 1040 lumens) designates color space...

Open the catalog to page 14

LUXEON M

LUXEON M

Catalog excerpts

All Philips Lumileds Lighting Company catalogs and technical brochures

Archived catalogs