*mydirectindustry

LUXEON Altilon SMD-A 1x2

1 / 18 PagesView full catalog

LUXEON Altilon SMD-A 1x2

Product catalog summary

Features and Benefits

The product features a compact design compatible with Al-IMS PCB, reducing system costs.
It offers a best-in-class Moisture Sensitivity Level 1 (MSL1) as per JEDEC J-STD-020E.
Single-die activation supports core Adaptive Driving Beam (ADB) functionality.
Hot-binned at 85°C to align with actual operating conditions.
Compliant with IEC / PAS 62707-1 standards for white LEDs.

Primary Applications

Used in headlighting for low and high beams.
Applicable in Adaptive Forward Lighting Systems and Adaptive Driving Beam.
Suitable for front fog lighting.

General Product Information

The LUXEON Altilon SMD-A 1x2 emitters are high-power Lumiramic TM Phosphor converted InGaN emitters mounted on an EMC leadframe, featuring a TVS chip per InGaN die for ESD protection.

Product Test and Binning Conditions

Monopulse testing is conducted with a 1 ms pulse at 1000 mA and 85°C.

Part Number Nomenclature

Part numbers indicate the number of dies, binning current, temperature, product generation, luminous flux, and distribution options.

Environmental Compliance

The product complies with RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006, avoiding restricted materials like lead and mercury.

Performance Characteristics

Minimum luminous flux ranges from 720 to 800 lumens.
Typical correlated color temperature ranges from 5180K to 6680K.

Electrical and Thermal Characteristics

Forward voltage ranges from 5.80V to 6.70V.
Thermal resistance junction to case ranges from 1.12 to 1.99 K/W.

Absolute Ratings

Maximum DC forward current: 1500 mA.
Maximum peak pulsed forward current: 3000 mA.
Operating case temperature: -40°C to 125°C.

Characteristic Curves

Includes spectral power distribution, light output vs. temperature, forward current vs. forward voltage, and color shift characteristics.

Product Bin and Labeling Definitions

Components are binned for luminous flux, color point, and forward voltage. A typical CAT code example is provided.

Color Bin Definitions

Details specific x and y coordinates, IEC codes, and typical correlated color temperatures (CCT) for different bins such as HC, H5, H2, and H3. Lumileds maintains a tester tolerance of ±0.005 on CIE1931 x, y color coordinates.

Forward Voltage Bins

Forward voltage distribution is narrow, with specific bins available upon request. Minimum and maximum forward voltages for bins B and C are listed, with a tolerance of ±0.06 V.

Mechanical Dimensions

Mechanical dimensions are provided with a note that drawings are not to scale and all dimensions are in millimeters.

Package Weight

The approximate weight of the LUXEON Altilon SMD-A 1x2 is 17.7 mg.

JEDEC Moisture Sensitivity

The product has a moisture sensitivity level of 1, with unlimited floor life under specified conditions.

Packaging Information

Details on pocket tape and reel dimensions are provided, with all dimensions in millimeters and drawings not to scale.

Product Labeling

An example of a product label is shown, with descriptions for customer use including part numbers, test date, lot identification, and country of origin.

About Lumileds

Lumileds is a leader in LED and microLED technology, providing solutions for various markets. The company operates in over 15 countries with approximately 3,500 employees.

Disclaimer

The document includes a disclaimer about the accuracy of the information and reserves the right to make changes without notice.

Catalog excerpts

LUXEON Altilon SMD-A 1x2 Unmatched robustness and utility for next-generation headlighting LUXEON Altilon SMD-A 1x2 LEDs are designed for advanced front lighting applications like ADB, low beam, high beam, and front fog. Its exceptional hot-cold stability, high contrast, and singledie addressability augment integrated versatility without compromise. LUXEON Altilon SMD-A 1x2 is hot-binned at 85°C, consistent with automotive operating environments for ease-ofuse. LUXEON Altilon SMD-A 1x2 is AEC-Q102 qualified and tested according to USCAR-33. FEATURES AND BENEFITS PRIMARY APPLICATIONS Compact design and Al-IMS PCB compatibility lowers system costs Single-die activation capability enables core ADB functionality and utility High Beam Hot-binned at 85°C to better match with actual operating conditions Adaptive Forward Lighting Systems Adaptive Driving Beam Front Fog DS375 LUXEON Altilon SMD-A 1x2 Product Datasheet 20250922 @2025 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 1

Open the catalog to page 2

General Product Information LUXEON Altilon SMD-A 1x2 emitters are high-power Lumiramic TM Phosphor converted InGaN emitters mounted on an EMC leadframe. All LUXEON Altilon SMD-A 1x2 emitters contain a TVS chip per InGaN die for ESD protection. 1) InGaN die 2) Lumiramic TM (Ceramic Phosphor Platelet) 3) Phosphor attach 4) InGaN die backside metallization 5) InGaN die attach soldering 6) Epoxy molded compound 7) Cu-core leadframe 8) Side coating 9) ESD protection device (TVS diode) Figure 1. Schematic cross section LUXEON Altilon SMD-A 1x2 Product Test and Binning Conditions Monopulse (MP) testing...

Open the catalog to page 3

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Altilon SMD-A 1x2 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). MINIMUM TOTAL LUMINOUS FLUX [1] (lm) PART NUMBER A1SD-58502DH007200...

Open the catalog to page 4

Absolute Ratings Table 4. Absolute ratings for LUXEON Altilon SMD-A 1x2 PARAMETER Minimum DC Forward Current Maximum DC Forward Current Maximum Peak Pulsed Forward Current [1] Maximum Emitter Junction Temperature Maximum Emitter Junction Temperature [1, 2] (DC & Pulse), short term Operating Case Temperature [1] Emitter Storage Temperature SMD Process Classification Temperature Allowable Reflow Cycles Reverse Voltage (Vreverse) Not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable...

Open the catalog to page 5

Characteristic Curves Spectral Power Distribution Characteristics Figure 2. Typical normalized power vs. wavelength for LUXEON Altilon SMD-A 1x2 at MP binning condition Light Output Characteristics Figure 3. Typical normalized light output vs. temperature for LUXEON Altilon SMD-A 1x2 at MP binning current DS375 LUXEON Altilon SMD-A 1x2 Product Datasheet 20250922 @2025 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 6

Figure 4. Typical normalized light output vs. forward current for LUXEON Altilon SMD-A 1x2 at MP binning temperature and at room temperature Forward Current and Forward Voltage Characteristics Figure 5. Typical forward current vs. forward voltage for LUXEON Altilon SMD-A 1x2 at MP binning temperature and at room temperature DS375 LUXEON Altilon SMD-A 1x2 Product Datasheet 20250922 @2025 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 7

Figure 6. Typical forward voltage shift vs. temperature for LUXEON Altilon SMD-A 1x2 at MP binning current DS375 LUXEON Altilon SMD-A 1x2 Product Datasheet 20250922 @2025 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 8

Color Shift Characteristics Figure 7. Typical color shift in CIE1931 x, y coordinates vs. temperature for LUXEON Altilon SMD-A 1x2 at MP binning current Figure 8. Typical color shift in CIE1931 x, y coordinates vs. forward current for LUXEON Altilon SMD-A 1x2 at MP binning temperature DS375 LUXEON Altilon SMD-A 1x2 Product Datasheet 20250922 @2025 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 9

Figure 9. Typical color shift over angle for LUXEON Altilon SMD-A 1x2 Radiation Pattern Characteristics Figure 10. Typical radiation pattern for LUXEON Altilon SMD-A 1x2 DS375 LUXEON Altilon SMD-A 1x2 Product Datasheet 20250922 @2025 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 10

Open the catalog to page 11

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON Altilon SMD-A 1 x2 emitters are labeled using a 4-digit alphanumeric CAT code following the format below: A - designates luminous flux bin (P = 360 to 370 lumens) B C - designates color bin (H5 = color bin H5) D - designates forward voltage bin (B = 5.80 V to 6.40 V) Therefore, a LUXEON Altilon SMD-A 1x2...

Open the catalog to page 12

Open the catalog to page 13

Table 6. Color bin definitions for LUXEON Altilon SMD-A 1x2 [1] 1. Lumileds maintains a tester tolerance of ± 0.005 on CIE1931 x, y color coordinates. Forward Voltage Bins Forward voltage distribution of Lumileds LEDs is very narrow, nevertheless for some applications the restriction of forward voltage is beneficial. On request individual bins are available according to Table 7. Table 7. Forward voltage bin definitions for LUXEON Altilon SMD-A 1x2 at MP binning condition BIN FORWARD VOLTAGE (Vf) MINIMUM 5.80 1. Lumileds maintains a tolerance of ±0.06 V on forward voltage measurements. DS375 LUXEON...

Open the catalog to page 14

LUXEON Altilon SMD-A 1x2

LUXEON Altilon SMD-A 1x2

Catalog excerpts

All Philips Lumileds Lighting Company catalogs and technical brochures

Archived catalogs