LUXEON 3535L
27Pages

{{requestButtons}}

Catalog excerpts

LUXEON 3535L - 1

General Illumination LUXEON 3535L High efficacy in a 3535 package with full range of CCTs and CRIs The LUXEON 3535L delivers optimized performance in combination with the Quality of Light needed for distributed light source applications. In addition to offering specified correlated color temperature and color rendering combinations, LUXEON 3535L is available in three performance levels. These LEDs boast the efficacy and reliability required by the indoor and outdoor illumination markets. Features and BENEFITS Industry standard package enables drop-in replacement for existing 3535 packages Maximum drive current of 200mA delivers superior lumens for reduced LED count Primary Applications Architectural Downlights 1/6th and 1/7th ANSI color binning delivers tight color control Indoor Area Lighting Enables Ts points of 105°C which allows for higher broad temperature Full range of CCTs and minimum CRI configurations for design flexibility Specialty Lighting DS203 LUXEON 3535L Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 1
LUXEON 3535L - 2

Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance...

Open the catalog to page 2
LUXEON 3535L - 3

General Information Product Nomenclature LUXEON 3535L Illumination emitters are tested and binned at 100mA, with current pulse duration of 20ms. All characteristic charts where the solder pad is kept at constant temperature (25°C typically) are measured with current pulse duration of 20ms. The part number designations for the MXA8 series is explained as follows: MXAD-EFGH-IJKL Where: D — designates minimum CRI performance (7 = 70 minimum and 8 = 80 minimum) E — designates radiation pattern (value P = Lambertian) F — designates color (W = White) G & H — designates nominal ANSI CCT (30 =...

Open the catalog to page 3
LUXEON 3535L - 4

Product Selection Product Selection for LUXEON 3535L LEDs Solder Pad Temperature = 25°C, Test Current = 100mA Table 1. Nominal CCT Part Number Table 1 continued on next page. DS203 LUXEON 3535L Product Datasheet 20150312 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 4
LUXEON 3535L - 5

1 Total angle at which 90% of total luminous flux is captured 2 Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value DS203 LUXEON 3535L Product Datasheet 20150312 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 5
LUXEON 3535L - 6

Electrical Characteristics Electrical Characteristics of LUXEON 3535L LEDs Solder Pad Temperature = 25°C, Test Current = 100mA Table 3. Forward Voltage Vf [1] (V) Minimum Typ. Temperature Coefficient of Forward Voltage [2] (mV/°C) DVf / DTJ Part Numbers Typical Thermal Resistance Junction to Solder Pad (°C/W) Ru J-C Notes for Table 3: 1. Lumileds maintains a tolerance of ± 0.10V on forward voltage measurements. 2. Measured between Tj = 25°C and Tj = 110°C. Absolute Maximum Ratings Table 4. Parameter Maximum Performance DC Forward Current (mA) [1] [3] Peak Pulsed Forward Current (mA) [2] [3]...

Open the catalog to page 6
LUXEON 3535L - 7

Reflow Soldering Characteristics 300 Time (seconds) Temperature Profile for Table 6. Table 6. Reflow Profile in Accordance with J-Std-020D. Profile Feature Lead Free Assembly Preheat/Soak : Temperature Min (Tsmin ) Temperature Max (Tsmax ) Maximum Time (ts ) from Tsmin to Tsmax Maximum Time (tL ) Maintained above TL Maximum Peak Package Body Temperature (Tp ) Time (tp ) within 5°C of the specified temperature (Tc ) Maximum Ramp-Down Rate (Tp to TL ) Maximum Time 25°C to Peak Temperature Note for Table 6: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on...

Open the catalog to page 7
LUXEON 3535L - 8

Mechanical Dimensions Figure 1. Mechanical dimensions for LUXEON 3535L MXAx-PWxx-S001. Figure 2. Mechanical dimensions for LUXEON 3535L MXAx-PWxx-0000 and MXAx-PWxx-H001. Notes for Figures 1 and 2: 1. All dimensions are in millimeters. 2. Tolerance: ±0.10mm. 3. Materials: -- Lead Frame: Copper Alloy with Silver Plating -- Package Body: High Temperature Thermal Plastic -- Encapsulant: Silicone Resin -- Solder Lead Finish: Ni-Ag Plating DS203 LUXEON 3535L Product Datasheet 20150312 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 8
LUXEON 3535L - 9

Figure 3. Solder pad layout for LUXEON 3535L. Notes for Figure 3: 1. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB). 2. Application Brief AB203 provides extensive details for this layout. In addition, the .dwg files are available at www.lumileds.com. Assembly Precautions The LUXEON emitter package contains a silicone overcoat to protect the LED chip and extract the maximum amount of light. As with most silicones used in LED optics, care must be taken to prevent any incompatible chemicals from directly or indirectly reacting with the silicone. The...

Open the catalog to page 9
LUXEON 3535L - 10

Typical Performance Curves Spectral Distribution vs. Wavelength Characteristics, MXA7-PWx-xxxx Figure 4a. Typical color spectrum of MXA7-PWx-xxxx emitter, integrated measurement Spectral Distribution vs. Wavelength Characteristics, MXA8-PWx-xxxx Figure 4b. Typical color spectrum of MXA8-PWx-xxxx emitter, integrated measurement at solder pad temperature = 25°C, forward current = 100mA. DS203 LUXEON 3535L Product Datasheet 20150312 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 10
LUXEON 3535L - 11

Spectral Distribution vs. Wavelength Characteristics, MXA9-PWxx-xxxx Figure 4c. Typical color spectrum of MXA9-PWxx-xxxx emitter, integrated measurement at solder pad temperature = 25°C, forward current = 100mA. DS203 LUXEON 3535L Product Datasheet 20150312 ©2015 Lumileds Holding B.V. All rights reserved.

Open the catalog to page 11

All Philips Lumileds Lighting Company catalogs and technical brochures

  1. LUXEON Rubix

    41 Pages

  2. LUXEON Neo

    19 Pages

  3. Front fog

    2 Pages

  4. Stop/tail

    2 Pages

  5. DRL

    2 Pages

  6. LUXEON 5050

    16 Pages

  7. LUXEON XR-M

    14 Pages

  8. LUXEON 3030 HV

    20 Pages

  9. LUXEON XR-TX

    9 Pages

  10. LUXEON HR30

    18 Pages

  11. LUXEON XR-3020

    10 Pages

  12. SnapLED Xtreme

    15 Pages

  13. LUXEON Z UV

    15 Pages

  14. LUXEON M

    23 Pages

  15. LUXEON MZ

    22 Pages

  16. LUXEON Q

    18 Pages

  17. LUXEON Rebel

    21 Pages

  18. LUXEON TX

    17 Pages

  19. LUXEON Z

    17 Pages

  20. LUXEON Z ES

    23 Pages

  21. LUXEON K

    28 Pages

  22. LUXEON S

    20 Pages

  23. LUXEON 3014

    18 Pages

  24. LUXEON 3020

    20 Pages

  25. LUXEON 3535 2D

    34 Pages

  26. LUXEON 3535 HV

    21 Pages

  27. LUXEON 4014

    25 Pages

  28. SignalSure 250

    15 Pages

  29. SnapLED 150

    15 Pages

  30. LUXEON 3030 2D

    19 Pages

  31. LUXEON Altilon

    24 Pages

  32. LUXEON H 50-2

    21 Pages

  33. LUXEON Z Color

    28 Pages

  34. LUXEON C

    17 Pages

  35. LUXEON R 2014

    19 Pages

  36. LUXEON UV

    15 Pages

  37. SuperFlux LEDs

    14 Pages

  38. LUXEON T

    16 Pages

Archived catalogs

  1. SnapLED 70

    5 Pages

  2. LUXEON® Rebel

    31 Pages