Series LC Escapements
6Pages

SERIES LC SINGLE ROD ESCAPEMENTS shoulders prevent tooling movement all units are inductive proximity switch ready acetyl rod bushing provides excellent wear characteristics and accurately locates rod seal cover body piston threaded mounting holes on both sides for simple tooling attachment hardened, ground and plated alloy steel rod and large bearing surfaces provide maximum wear resistance and high side load capacity both thru and dowel holes in body are provided for quick setup and convenient, repeatable mounting piston bore and bearing surfaces of body are hardcoated with PTFE for long life and wear resistance long life nitrile piston and rod seals for low maintenance Major Benefits Industry Uses all units with 10-32 or M5 ports come standard with barbed fittings • Material handling/conveyors • Assembly machine builders • Automotive • Medical • Optical Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy field maintenance Large rod bearing area ensures high side load capacity Next day delivery

DESCRIPTION NPN 4.5 - 24 VDC with 2 meter cable PNP 4.5 - 24 VDC with 2 meter cable NPN 4.5 - 24 VDC with quick connect PNP 4.5 - 24 VDC with quick connect SHOCK PADS BB - Shock Pads on both directions See stroke table for option effect on stroke. Switch sensing is limited to one direction on LCSx10 and LCSx12 units. Switches and brackets must be ordered separately. SWITCH READY OPTIONS E - Hall Effect Switch Ready Series 5580 Switch on LCSx10 units Series 5360 Switch on all other units OPTION STANDARD UNIT SHOCK PAD (-BB) STROKE ADJ (-AR) -AR -BB MISCELLANEOUS OPTIONS R9 - Flats and...

ENGINEERING DATA: Series LC SINGLE ROD escapements SPECIFICATIONS OPERATING PRESSURE OPERATING TEMPERATURE STANDARD TOLERANCE RATED LIFE VELOCITY LUBRICATION MAINTENANCE SERIES LC 20 to 150 psi [1.4 to 10 bar] air -20¡ to 180¡F [-28¡ to 82¡C] +.031/-.000 [+.08/-.00] 5 million cycles* 20 in/sec [0.5 m/sec] typical min, zero load at 100 psi [7 bar] Factory lubricated for rated life Field repairable *-V1 option may reduce life. ROD DIRECTION EXTEND RETRACT EXTEND RETRACT EXTEND RETRACT EXTEND RETRACT STROKE TABLE CYLINDER THRUST CALCULATION Imperial Metric F = P x A F = 0.1 x P x A F =...

MOUNTING SURFACE DIMENSIONS: Series LC SINGLE ROD escapements 4 C M 2X H THREAD THRU EACH ROD 2X CLEARANCE HOLE FOR Q DOWEL PIN TOP VIEW WITH OPTIONAL STROKE ADJUSTMENT (Not available on LCSx10 units) All dimensions are reference only unless specifically toleranced.

OPTIONS: Series LC SINGLE ROD escapements SHOCK PADS INSTALLED BOTH DIRECTIONS Polyurethane shock pads for noise reduction and absorption of shock at ends of stroke are available on each end of Series LC Escapements. Shock pads permit higher piston velocities for shorter cycle times. Noise reduction is beneficial for the working environment. NOTE: Shock pads reduce standard stroke by .039 [1 mm] on LCSx10 and LCSx12 units. STROKE ADJUSTMENT ON RETRACT SHOCK PADS This option specifies flats and threaded holes on sides 1 and 3. Mounting holes and flats on sides 2 and 4 are standard. STROKE...

PROXIMITY SWITCHES: Series LC SINGLE ROD escapements INDUCTIVE PROXIMITY SWITCH READY PROXIMITY SWITCH 4 mm Round Inductive 6 mm Square Inductive All units are inductive proximity switch ready as standard. A threaded hole is provided in the body cover to allow attachment of PHD bracket kits for 4 mm round or 6 mm square inductive proximity switches. NOTE: Switch targets mounted on the rod end or on the rod tooling are to be provided by the end user. See Switches and Sensors section for complete switch specifications. EACH PROXIMITY SWITCH MOUNTING KIT CONTAINS: 1 SWITCH BRACKET 1 BRACKET...