PA series
8Pages

SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Switches Installed

© Copyright 2008, by PHD, Inc. All Rights Reserved. Printed in the U.S.A. (800) 624-8511 ARM ROTATION DIRECTION* R - Right L - Left PORT FITTINGS (BOTH PORTS) BLANK - None LBB - 90 Swivel Fitting (See Note 1) ARM DOWN CLAMP PORT NOTE: 1) 90 Swivel fittings not available on size 2 units. SPINDLE OPTIONS BLANK - None TA - Steel TN - Neoprene Tipped *NOTE: Rotation is the direction the arm rotates when clamping and looking down at rod end. BODY STYLE S - Standard (Block) ARM OPTIONS BLANK - None AS - Single Steel ASC - Single Copper Options & Kits Pages 6 to 8 DESIGN NO. 1 - Imperial 5 -...

SERIES PA CLAMPS IDEAL FOR A WIDE VARIETY OF AUTOMATED PART HOLDING AND TRANSFER APPLICATIONS steel and copper arms are supplied for standard and welding applications mounting patterns on three surfaces of the rectangular body provide flexibility in design and clamp mounting steel and Neoprene-tipped spindles are available for clamping rugged or show finishes flow controls are not required body has controlled orifice communication switch ready Reed and Hall Effect Switches are available for easy interfacing to electronic controls and logic systems simple design employs a hardened helical...

DIMENSIONS: SERIES PA CLAMPS SWITCH SLOTS (FROM OPPOSITE SIDE) NOTE: S1 = TOTAL STROKE = ROTARY STROKE S3 = CLAMP STROKE All dimensions are reference only unless specifically toleranced. www.phdinc.com/pa PAOic |#l IW INDUSTRIAL AUTOMATION

ENGINEERING DATA: SERIES PA CLAMPS INDUSTRIAL AUTOMATION PA01C www.phdinc.com/pa

OPTIONS & KITS: SERIES PA CLAMPS AS Single arms are made of steel or copper, one alloy socket head cap screw included. WEIGHT STEEL COPPER TN6 (ACROSS NUT FLATS) TN1 THREAD All dimensions are reference only unless specifically toleranced. NEOPRENE TIPPED SPINDLE Neoprene tipped spindles are plated threaded steel with 65 Durometer Neoprene molded onto the end. Two hex nuts are included. STEEL SPINDLE Steel spindles are plated steel with two hex nuts included.

OPTIONS & KITS: SERIES PA CLAMPS SW4 HALL EFFECT SWITCHES (PNP) INSTALLED HALL EFFECT SWITCHES (NPN) INSTALLED MAGNETORESISTIVE SWITCHES (PNP) INSTALLED WITH QUICK CONNECT REED SWITCHES INSTALLED MAGNETORESISTIVE SWITCHES (NPN) INSTALLED WITH QUICK CONNECT M2.5 MOUNTING SCREW TORQUE TO 1.5 in-lb MAX .984 [25.0] (SW1) 71115-01-01 SPECIFICATIONS Moving Magnet ACTUATED BY 6 Watt Max. POWER CAPACITY Normally Open OUTPUT STATE Magnetic Reed OPERATING PRINCIPLE SPST Contact Closure OUTPUT TYPE 5 - 120 VAC/VDC OPERATING VOLTAGE 50 mA Max. CURRENT RATING (RES.) — BURDEN CURRENT 2.5 V Max. VOLTAGE...

OPTION: SERIES PA CLAMPS LBB PORT FITTINGS Port fitting is not available on size 2. LETTER PORT FITTING OPTION DIMENSION in mm PF1 (MIN) .629 12.0 PF1 (MAX) .748 16.0 PF2 .885 20.0 PF3 .472 12.0 To order fittings separately: Part No. 71120-001 - Imperial Part No. 71121-001 - Metric PF1 FITTINGS MAY SWIVEL 360 FROM LOCATION SHOWN PF3 HEX SELF SEALING SWIVEL MALE ELBOW FOR 1/4" [6 mm] TUBING CLAMP PORT RELEASE PORT EXPLODED VIEW & PARTS LIST: SERIES PA CLAMPS 4 KEY DESCRIPTION 1 Body Assembly 2 3 Imperial Metric Piston & Rod Assembly Spline & Plug Assembly 90 Right 90 Left Arm Kits Single...