CLAMPS
156Pages

GRM CLAMP ACCESSORIES/OPTIONS > GRM CLAMPS

75 45 а > JAW AJAW B JAW AJAW B 22 > JAW AJAW B GRM CLAMPS 22 а 75 45 а 75 45 а > STANDARD (S) 22 > JAW AJAW B JAW AJAW B JAW AJAW B а а 75 45 а 22 > JAW AJAW B JAW AJAW B JAW AJAW B 45 а 22 75 а 75 45 а 22 > JAW AJAW B JAW AJAW B JAW AJAW B SINGLE OR DOUBLE CHISEL (C or D) а а 75 45 а 22 > JAW BJAW BJAW BJAW AJAW AJAW A SINGLE OR DOUBLESHOVEL (H or J) а а 85 45 а 22 > JAW BJAW A JAW BJAW A JAW BJAW A SINGLE OR DOUBLEFLAT SHOVEL (L or M) а а >

GRM CLAMPS 85 50 а 50 > FLANGE (F)CHISEL DIAMOND POINT (N OR P)HOOK (K) JAW AJAW B JAW A JAW AJAW B а > JAW B 22 а 75 45 а > JAW A JAW AJAW B 22 > JAW AJAW B JAW B 45 а 22 75 а 75 45 а > JAW AJAW B JAW A 22 > JAW AJAW B JAW B а а 50 50 а 40 25 а > JAW AJAW B 20 а > JAW AJAW B JAW AJAW B 40 22 а 40 > JAW AJAW B JAW AJAW B JAW AJAW B TOOLABLE (G) а 40 22 а >

75 45 а 22 > JAW AJAW B JAW AJAW B JAW AJAW B GRM CLAMPS 75 а 45 22 а > STANDARD (S)FLANGE (F) 75 45 а 22 > JAW AJAW B JAW AJAW B JAW AJAW B а а 75 45 а 22 > JAW AJAW B JAW AJAW B JAW AJAW B а а > SINGLE OR DOUBLE SHOVEL (H or J) 85 50 а > JAW AJAW B JAW AJAW B а 6 +49 (0) 2401 805 230 > www.phdinc.com/clamps MCLAMP05-EU size="-2">

GRM CLAMPS 70 40 а 22 > JAW A JAW B JAW A JAW B JAW A JAW B 70 а 40 22 а > TOOLABLE (G) 70 40 а > JAW A JAW B JAW A JAW B а 7 +49 (0) 2401 805 230 > MCLAMP05-EU www.phdinc.com/clamps size="-1">

NOTE: THE STOP BLOCK MOUNTING SCREW IS EXTRA LONG AND MUST BE USED TO MOUNT STOP BLOCK IN ANYLOCATION ON BODY OR JAWS.IF THIS EXTRA LONG SCREW IS ASSEMBLED INTO THEIMPACT PLATE WITHOUT THE STOP BLOCK, IT WILL HIT AND DAMAGE THE JAWS. JAWPIVOT J1(OPEN)T2 B4(OPEN) LETTERDIM > STOP BLOCK LOCATIONS1HEXT2J1(OPEN) B4(OPEN) JAW PIVOT JAWASSEMBLE STOP BLOCK IN THIS SLOTFOR GRMxxS-x-45xxx-45xxx UNITS URETHANE PAD ORIENTEDTOWARD JAW CAM SLOT STOP BLOCK STOP BLOCKSHCS TIGHTEN TO125 in-lb [14.1 Nm] TIGHTEN TO125 in-lb [14.1 Nm] LETTERDIM MODEL NUMBER B4 (OPEN)J1 (OPEN)S1T2 GRM2xSinmm > JAW PIVOT...

mm 239.5 117.387.6 29.764.667.9 GRM2xHin MODEL NUMBER NOTE: LETTERDIM 6.8203.606 2.684.9221.8041.961 GRM4xH > GRM CLAMPS JAW PIVOT J1(OPEN)J14 THE STOP BLOCK MOUNTING SCREW IS EXTRA LONGAND MUST BE USED TO MOUNT STOP BLOCK IN ANYLOCATION ON BODY OR JAWS.IF THIS EXTRA LONG SCREW IS ASSEMBLED INTO THEIMPACT PLATE WITHOUT THE STOP BLOCK, IT WILL HITAND DAMAGE THE JAWS. T2 J15(OPEN)J6(OPEN) B4(OPEN) mm 239.5110.680.9 29.7 53.25.049.0 MODEL NUMBERmm LETTERDIM GRM2xHin GRM4xHin > STOP BLOCK LOCATION S1HEX J1(OPEN)J14 ASSEMBLE STOP BLOCK IN THIS SLOTFOR GRMxxH-x-45xxx-00 UNITS JAW PIVOT T2 STOP...

GRM2xJin MODEL NUMBER NOTE: LETTERDIM 6.820 3.606 2.684.9221.804 1.961 GRM4xJin > GRM CLAMPS THE STOP BLOCK MOUNTING SCREW IS EXTRA LONGAND MUST BE USED TO MOUNT STOP BLOCK IN ANYLOCATION ON BODY OR JAWS.IF THIS EXTRA LONG SCREW IS ASSEMBLED INTO THEIMPACT PLATE WITHOUT THE STOP BLOCK, IT WILL HITAND DAMAGE THE JAWS. JAW PIVOT J1(OPEN)J14 T2 J15(OPEN)J6(OPEN) B4(OPEN) mm 239.5 110.680.9 29.7 53.25.049.0 GRM2xJin MODEL NUMBERmm LETTERDIM 6.820 3.324 2.402.9221.495.1971.438 GRM4xJin > STOP BLOCK LOCATION S1HEX J1(OPEN)J14 ASSEMBLE STOP BLOCK IN THIS SLOT FOR GRMxxJ-x-45xxx-00 UNITS JAW PIVOT...

ORDERING DATA: 26 +49 (0) 2401 805 230 www.phdinc.com/clamps TO ORDER SPECIFY: Size, Mounting, Jaw Style Option, Design No., Jaw Opening (A & B), Jaw Tip Option (A & B), and Fitting Option if desired. > GRM CLAMP JAWSTYLE OPTIONL & M STYLES ONLY JAW A > 22YES45YES85YES JAW B > JAW AJAW B JAW OPENING - JAW A 22 -22.5 Opening45 -45 JAW STYLE OPTION а Opening85 -85 JAW OPENING - JAW B NOTES: > GRM CLAMP JAW STYLES L & MӔ UNIT SIZE L-Single Flat Shovel ClampM-Double Flat Shovel Clamp Opening(See Note 1) 00 - 0 а Opening(See Note 1) 2 - 32 mm Short > MCLAMP05-EU MOUNTING DESIGN NO. JAW TIP...

GRM CLAMPS Double Flat ShovelMӔ Jaw Style Single Flat ShovelLӔ Jaw Style no upper jaw swing through rear mounting plate integral to the body compact lower jaws self-locking internal threads ideal for blank loading throughout eliminate need forthread locking adhesives oradditional locking componentsports located toward rearof body away fromclamping region > Contact your local distributor for Clamp unit pricing.

7.065 3.442 2.362.0391.080 1.806 GRM2xLmm 179.587.4 60.01.027.445.9 J6(OPEN) T2 J1(OPEN) J14 STOP BLOCK LOCATION STOP BLOCKLOCATION JAWASSEMBLE STOP BLOCK IN THIS HOLEFOR GRM2xL-x-45xxx-00 UNITS ASSEMBLE STOP BLOCK IN THIS SLOTFOR GRM2xL-x-22xxx-00 UNITSSTOP BLOCKSTOP BLOCKPINURETHANE PAD ORIENTEDAS SHOWNJAW JAW PIVOT JAW PIVOT JAW PIVOT J11 STOP BLOCKSTOP BLOCKPINURETHANE PAD ORIENTEDAS SHOWN B5(OPEN) LETTERDIM >

GRM2xMmm 179.587.4 60.01.027.445.9 J6(OPEN) J1(OPEN) T2 J14 STOP BLOCK LOCATION STOP BLOCKLOCATION JAW PIVOT JAW PIVOT JAW PIVOT J11 JAWASSEMBLE STOP BLOCK IN THIS HOLEFOR GRM2xM-x-45xxx-00 UNITS STOP BLOCKSTOP BLOCKPINURETHANE PAD ORIENTEDAS SHOWN B5(OPEN) LETTERDIM B5 (OPEN)J1 (OPEN) J6 (OPEN)J11J14T2 > GRM2xMmm in 7.065 2.795 1.715.0391.080.883 179.571.0 43.61.027.4 22.4 J6(OPEN) T2 J1(OPEN) J14 J11 JAWSTOP BLOCKSTOP BLOCKPIN ASSEMBLE STOP BLOCK IN THIS HOLEFOR GRM2xM-x-22xxx-00 UNITS URETHANE PAD ORIENTEDAS SHOWN B5(OPEN) >

GRM CLAMPS > 32 Material Thickness > ORDERING DATA: TO ORDER SPECIFY: 1.21 to1.52 mmBlankSCGDCG SDGDDGSUBDUB1.53 to1.94 mmBlankSCSDCS SDSDDSSUBDUB1.95 to2.29 mmBlankSCGDCG SDGDDGSUBDUB2.3 to2.6 mmBlankSCGDCG SDGDDGSUBDUB2.61 to3.0 mmBlank ח חSUBDUB0 to.85 mmBlankSCBDCB SDBDDBSUBDUB > +49 (0) 2401 805 230 www.phdinc.com/clamps Size, Mounting, Jaw Style Option, Design No., Jaw Opening (A & B), Jaw Tip Option (A & B), and Fitting Option if desired. JAW TIP OPTIONS JAW A .86 to1.2 mmBlankSCSDCS SDSDDSSUBDUB No tipSingle Cone Point Double Cone Point Single Diamond Point Double Diamond Point...

GRM CLAMPS threaded holes and spherical grooveon body accept fixed and sphericalmounting brackets adjustable hardened-steel impact plate eliminates damage to body from panel impact adjustable rotation stop allows for multiple openings in one clamp jaws designed specifically forclamping on bends and folds hardcoated aluminum body provides long life field repairable in 10 minutesusing metric hex wrenches >