Series 160 Escapements
8Pages

SERIES 160 DOUBLE ROD ESCAPEMENTS STANDARD DUTY HEAVY DUTY PTFE hardcoated bearing surfaces fluoropolymer composite bearing surfaces for heavy duty applications internal sequence mechanism ensures that both rods are extended before either rod can retract for positive part feeding shoulders on each rod prevent tooling movement cover multiple rod end options for tooling mounting versatility acetyl rod bushing provides excellent wear characteristics and accurately locates rod seal hardened, ground and plated alloy steel rod and large bearing surfaces provide maximum wear resistance plus high side load capacity both thru and dowel holes in body are provided for quick setup and convenient, repeatable mounting standard duty unit’s bearing surfaces are hardcoated with PTFE bearing surfaces for long life and wear resistance long life nitrile piston and rod seals for low maintenance all units with 10-32 or M5 ports come standard with barbed fittings piston bore is hardcoated with PTFE for long life and wear resistance heavy duty units offer fluoropolymer rod bearing surfaces as alternative Major Benefits Industry Uses • Material handling/conveyors • Automotive • Light bulb manufacturing • Optical • Medical Ideal for isolating and feeding individual parts from vibrating feeders, magazines, hoppers or conveyors Internally ported design requires only one 4-way valve for operation offered in standard and heavy duty Switch and flow control options Large rod bearing area ensures high side load capacity Next day delivery www.phdinc.com/160

ORDERING DATA: Series 160 DOUBLE ROD escapements STANDARD DUTY TO ORDER SPECIFY: Series, Model, Design No., Rod End Option, Cap Option, Switch Ready Option, and Seals. SERIES CAP OPTIONS 0 - Standard Cap 1 - Cap with flow controls and stroke adjustment 2 - Cap with stroke adjustment only Cap with flow controls and/or stroke adjustments not available on Model 02 or 03. SEALS 1 - Buna-N 2 - Fluoro-Elastomer MODEL IMPERIAL 02 - 3/8" Bore & Stroke 12 - 1/2" Bore & Stroke 22 - 3/4" Bore & Stroke 42 - 1-1/4" Bore & Stroke ROD END OPTIONS 1 - Flats and threaded holes on sides 1 and 3 on both rods...

ENGINEERING DATA: Series 160 DOUBLE ROD escapements SPECIFICATIONS SERIES 160 OPERATING PRESSURE 30 psi min to 150 psi [2 bar min to 10 bar max] air OPERATING TEMPERATURE -20¡ to +180¡F [-28¡ to +82¡C] VELOCITY 20 in/sec [0.5 m/sec] typical min, zero load at 100 psi [7 bar] LUBRICATION 5 million cycles MAINTENANCE Field repairable HEAVY DUTY, SLOTTED MTG .500 STD DUTY, STD MTG HEAVY DUTY, STD MTG HEAVY DUTY, SLOTTED MTG .750 STD DUTY, STD MTG HEAVY DUTY, STD MTG STD DUTY, STD MTG 1.250 F = Cylinder Force P = Operating Pressure A = Effective Area EXTEND RETRACT EXTEND RETRACT RESPONSE TIME P...

MOUNTING SURFACE DIMENSIONS: Series 160 DOUBLE ROD escapements STANDARD DUTY A 4X THRU HOLE FOR R SCREW 2X PRECISION HOLE FOR “T” ROLL PIN HOLE MAY ALSO BE DRILLED AND REAMED FOR U DOWEL PIN 2X K THREAD THRU EACH ROD OPTIONAL -x1xx & -x2xx UNITS -x1xx UNITS WITH FLOW CONTROLS AND STROKE ADJUSTMENTS -x2xx UNITS WITH STROKE ADJUSTMENTS ONLY 2X Z PORT 2X FLOW CONTROL NOTES: 1) METRIC DIMENSIONS ARE IN MILLIMETERS 2) ROD STROKES MAY BE LIMITED TO .125" [3.17 mm] BY USE OF OPTIONAL STROKE ADJUSTMENT SCREWS 3) FULLY EXTENDED ROD MAY RETRACT UP TO 0.025" [0.64 mm] UPON PRESSURIZATION OF RETRACTED...

MOUNTING SURFACE DIMENSIONS: Series 160 DOUBLE ROD escapements heavy DUTY 4 C K THREAD X GG DP EACH ROD FOR -0xxx OPTION H 1 4X K THREAD THRU EACH ROD FOR -0xxx OPTION 2 E 2X THRU HOLE FOR R SCREW C L 2X PRECISION HOLE FOR “T” ROLL PIN HOLE MAY ALSO BE DRILLED AND REAMED FOR U DOWEL PIN 2X MODELS 10, 11, 20, & 21 THRU SLOT FOR R SCREW 2X MODELS 14, 15, 24, & 25 THRU HOLE FOR R SCREW A REF UNITS WITH FLOW CONTROLS AND STROKE ADJUSTMENTS -x2xx UNITS WITH STROKE ADJUSTMENTS ONLY 2X Z PORT 2X FLOW CONTROL NOTES: 1) METRIC DIMENSIONS ARE IN MILLIMETERS 2) ROD STROKES MAY BE LIMITED TO .125"...

design selection and operation: Series 160 HEAVY DUTY VS. STANDARD DUTY PHD Escapements are available in heavy and standard duty models. The heavy duty model is offered in two sizes and uses fluoropolymer composite rod bearings which allow higher static and impact loads on the stroke rods. The standard duty model is offered in four sizes. It utilizes PTFE impregnated hardcoat rod bearings for applications requiring moderate static and impact loads on the stroke rods. body available with thru mounting holes only body with thru or slotted mounting holes STANDARD DUTY HEAVY DUTY PTFE...

OPTIONS: Series 160 DOUBLE ROD escapements -Xxxx ROD END OPTIONS PHD Escapements can be specified with a number of rod end options. The dimensioned drawing on page 3-7 shows rod option -0 specifying flats and threaded holes on four sides with an additional threaded hole in the end of the rod. OPTIONS -1 THROUGH -4 REFERENCE DRAWING The most cost effective rod end options are -1, -2, -3, and -4. These options provide mounting holes and flats on two sides only of each rod. 0 - Flats and threaded holes on all four sides with a threaded hole in the end on both rods (heavy duty option only) 1 -...

OPTIONS: Series 160 DOUBLE ROD escapements 2 SWITCH READY -xx2x 16002 AND 16003 UNITS ONLY PROXIMITY SWITCH MOUNTING KITS PROXIMITY SWITCH 4 mm Round Inductive 6 mm Square Inductive This option equips the escapement with mounting holes for use with either 4 mm round or 6 mm square metal sensing proximity switches on the Series 16002 and 16003 Escapements. Proximity switches and mounting kits must be ordered separately. See Switches and Sensors section for complete switch specifications. Each proximity switch mounting kit contains: 1 switch bracket 1 bracket mounting screw NOTE: Switch...