*mydirectindustry

Catalogs
PHD, Inc.
A, HV, AV series

A, HV, AV series

1 / 64 PagesView full catalog

A, HV, AV series

Product catalog summary

Major Benefits:

Designed for long life with low maintenance requirements.
NFPA repairable for extended life and cost savings.
Wide range of options for easy application and reduced design time.
Fast delivery within two working days.
Various mounting styles for easy installation.

Specifications:

Available in bore sizes of 3/4", 1", and 1-1/8".
Series AV and A operate at 150 psi air, Series HV at 1500 psi hydraulic.
Operating temperature range: -20 to 180°F (-29 to 82°C).
Field repairable and permanently lubricated (Series AV and A).

Ordering Information:

Specify stroke adjustment, magnetic piston options, rod end types, and port positions.
Options include various rod ends, extra rod extensions, and coarse thread rod ends.
Port Control® options for flow control on both ends, head end, or cap end.

Mounting Styles:

Includes Foot Mount, Bottom Mount, Rod Mount, Thread Mount, Rod End Flange, Cap End Flange, Pilot Mount, Pivot Mount, Tierod Mount.

Options:

Spring Return and/or Double Rod End configurations.
Cushion or Shock Pad options available.
Oversize rods and close tolerance stroke options.

Engineering Data:

Includes cylinder unit weights and effective air consumption displacement.
Force calculations based on cylinder bore and rod diameter.

Dimensions:

Detailed dimensions for Series AV, HV, and A provided for each bore size.
Port positions, cushion, and shock pad adjustments detailed.

Overview: This document provides technical specifications and options for PHD's Series A, AV, and HV cylinders, focusing on the 1-3/8" bore size. It includes details on the Rodlok mechanism, various mounting styles, port positions, and additional options for customization.

Rodlok Mechanism: Designed to lock the piston rod in a static position when pressure is removed. Not intended as a personnel safety device. Performance is sensitive to application and environmental conditions.

Options and Customizations: Includes magnetic pistons, fluoro-elastomer seals, electroless nickel plating, and close tolerance stroke options.

Additional Features: Covers features like shock pads, spring return mechanisms, and SAE ports for hydraulic cylinders.

Reservoir and Tubing Installation:

Mount the reservoir vertically above the hydraulic section. Maintain a constant air supply of 20 psi at the reservoir's inlet port during operation.

Magnetic Piston and Switches:

PHD cylinders can be equipped with a magnetic band on the piston to activate externally mounted Hall Effect or Reed Switches.

Series TD Air/Oil Tandem Models:

Provide hydraulic control with pneumatic simplicity. The -X option must be specified for units filled with oil and bled of air.

Standard Port Control®:

Features an adjustable needle and a separate ball check for controlling cylinder speed over its stroke.

Specifications: The document provides detailed specifications for hydraulic and pneumatic cylinders, including rod diameters, thread sizes, bore sizes, and stroke lengths.

Procedures and Cautions: A caution is noted for the hydraulic three-position cylinder (H3V) to ensure proper valving to avoid blocking flow.

Standards and Recommendations: Outlines standard stroke lengths for various bore sizes and provides guidelines for longer strokes.

Switches and Accessories: Information on compact Hall Effect and Reed Switches is provided, including part numbers and descriptions.

Force and Consumption Data: A cylinder force table is included, showing effective air consumption and displacement for different bore sizes and rod diameters at 80 psi.

Options and Customizations: Describes options like adjustable cushions, shock pads, and magnetic pistons for use with proximity switches.

Dimensional Information: Detailed dimensional data for various series and bore sizes are provided.

Port Control and Cushion Systems: Explains the PHD Port Control® system, which includes adjustable needles and ball checks for speed control.

Catalog excerpts

zinc-plated alloy steel heads and caps for robust construction AVrHV, 3/4", 1", & 1-1/8" BORE TIE ROD HYDRAULIC & PNEUMATIC CYLINDERS Major Benefits • Long life design for low maintenance • NFPA repairable for extended life providing long term savings • Wide range of options for easy application and reduced design time • Two working day delivery • Wide range of mounting styles for easy installation pressure & wear compensating long life Nitrile piston seals (AV, HV) aluminum alloy piston corrosion resistant stainless steel rod long life bronze rod bushings anodized aluminum tube for long seal life and smooth motion pressure & wear compensating long life Nitrile rod seal PTFE rod wiper for durability JI HOBO DllOe es SOLUTIONS FOR INDUSTRIAL AUTOMATION

Open the catalog to page 1

ORDERING DATA: SERIES A, AV, HV; 3/4", 1", 1-1/8" BORE TO ORDER SPECIFY: Spring Return/Double Rod End, Series, Mounting Style, Bore Size, Stroke, Port Control®, and any Options. Also specify rod diameter if non-standard. Rod couplings and mounting attachments must be ordered separately. BORE SIZE 3/4" BORE 1/4" Std. Rod Dia. 1/4-28 Thread 1" BORE 5/16" Std. Rod Dia. 5/16-24 Thread 1-1/8" BORE 3/8" Std. Rod Dia. 3/8-24 Thread SC AV F SPRING RETURN SC - Spring on cap end SR - Spring on rod end (Strokes available in 1/4" increments up to 6 ".) See option pages. and/or DOUBLE ROD END D - Double Rod...

Open the catalog to page 2

Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: www.phdinc.com/apps/sizing JI HOBO DllOe es SOLUTIONS FOR INDUSTRIAL AUTOMATION

Open the catalog to page 3

DIMENSIONS: SERIES AV; 3/4", 1", 1-1/8" BORE BORE SIZE PORT POSITIONS: INDICATED BY CIRCLED NUMBERS CUSHIONS: ADD 1/2" TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHION SHOCK PADS: ADD 1/4" TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PAD SPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO (+ STROKE) DIMENSIONS (2 x STROKE) F (MS8) MTG: 3/4" BORE UNITS ORDERED WITH AN OVERSIZE PISTON ROD WILL HAVE MTG. TABS ON THE HEAD END. CONSULT PHD FOR DIMENSIONAL INFORMATION. OVERSIZE RODS: SEE PAGE 1-40 FOR OVERSIZE ROD SPECIFICATIONS. All dimensions are reference only unless specifically toleranced. OnClEJ EE...

Open the catalog to page 4

AV, HV, A All standard rod ends have four wrench flats (two wrench flats with “I” option). PORT POSITIONS: INDICATED BY CIRCLED NUMBERS CUSHIONS: ADD 1/2" TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHION SPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO (+ STROKE) DIMENSIONS (2 x STROKE) F (MS8) MTG. : 3/4" BORE UNITS ORDERED WITH AN OVERSIZE PISTON ROD WILL HAVE MTG. TABS ON THE HEAD END. CONSULT PHD FOR DIMENSIONAL INFORMATION. OVERSIZE RODS: SEE PAGE 1-40 FOR OVERSIZE ROD SPECIFICATIONS. JI HOBO DllOe es SOLUTIONS FOR INDUSTRIAL AUTOMATION All dimensions are reference only unless specifically...

Open the catalog to page 5

BASIC CYLINDER DIMENSIONS FT THREAD-D WRENCH FLAT- F (MS8) - WITH PORT CONTROL ON CAP END © f*-2.625 + STROKE- -3X C'BORED HOLES FOR DB SHCS 4X AA THREAD _ EACH MOUNTING STYLE ©l L- .500 RC & RRC All standard rod ends have four wrench flats (two wrench flats with “I” option). PORT POSITIONS: INDICATED BY CIRCLED NUMBERS CUSHIONS: ADD 1/2" TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHION SHOCK PADS: ADD 1/4" TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PAD SPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO (+ STROKE) DIMENSIONS (2 x STROKE) F (MS8) MTG.: 3/4" BORE UNITS ORDERED WITH AN OVERSIZE...

Open the catalog to page 6

AV, HV, A RC, RR, RRC (Includes RR & RC) All standard rod ends have four wrench flats (two wrench flats with “I” option). DIMENSIONS COMMON TO ALL SERIES PORT POSITIONS: INDICATED BY CIRCLED NUMBERS CUSHIONS: ADD 1/2" TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHION SHOCK PADS: ADD 1/4" TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PAD SPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO ALL (+ STROKE) DIMENSIONS (2 x STROKE) F (MS8) MTG: 3/4" BORE UNITS ORDERED WITH AN OVERSIZE PISTON ROD WILL HAVE MTG. TABS ON THE HEAD END. CONSULT PHD FOR DIMENSIONAL INFORMATION OVERSIZE RODS: SEE PAGE 1-40 FOR OVERSIZE...

Open the catalog to page 7

PORT CONTROL® DC DR ADJUSTABLE CUSHION AV, HV, A The exclusive PHD Port Control®, based on the "meter-out" principle, features an adjustable needle and a separate ball check. Both are built into the cylinder end cap and are used to control the speed of the cylinder over its entire stroke. PHD Cushions are designed for smooth deceleration at the end of stroke. When the cushion is activated the remaining volume in the cylinder must exhaust past an adjustable needle which controls the amount of deceleration. RODLOK CYLINDER & RODLOK Available on single rod Series A and AV units only. (preassembled)...

Open the catalog to page 8

REED SWITCHES HALL EFFECT SWITCHES PHD Cylinders may be equipped with a magnetic band (specify -E) on the piston which activates externally mounted PHD Hall Effect Switches. These switches allow the interfacing of the Tom Thumb® air or hydraulic cylinder to various logic systems. The PHD Magnetic Reed Switches may be used in situations where the Hall Effect Switches are not applicable. As with the Hall Effect Switches, a magnetic band (specify-M) on the piston activates the externally mounted PHD Reed Switches. The Reed Switches may be used to signal a programmable controller, sequencer, relay,...

Open the catalog to page 9

BORE SIZE NOTE: On double rod cylinders, both rod ends will be the same on both ends of the cylinder. EYE BRACKET KIT -4X C'BORED HOLE FOR DD SHCS* BORE CYL PART SIZE SERIES NO. *For 3/4 bore thru hole only. BORE CYL PART SIZE SERIES NO. *For 3/4 bore thru hole only. All dimensions are reference only unless specifically toleranced. PIlOs E9 SOLUTIONS FOR INDUSTRIAL AUTOMATION

Open the catalog to page 10

OPTIONS: SERIES A, AV, HV; 3/4", 1", 1-1/8" BORE PORT CONTROL® The exclusive PHD Port Control , based on the "meter-out" principle, features an adjustable needle and a separate ball check. Both are built into the cylinder end cap and are used to control the speed of the cylinder over its entire stroke. The self-locking needle has micrometer threads and is adjustable under pressure. It determines the orifice size which controls the exhaust volume. The separate ball check is closed while fluid is exhausting from the cylinder, but opens to permit full flow of incoming fluids. The PHD Port Control®...

Open the catalog to page 11

All PHD, Inc. catalogs and technical brochures

Archived catalogs

CLAMPS
156 Pages