AXS 500HIGH POWER DENSITY SERVO DRIVECOMPACT, LIQUID-COOLED INVERTERFOR ADVANCED MOTION AND ENERGY CONVERSION SYSTEMS The AXS 500 is a high-performance servo drive specifically designed for demanding mobile and industrial applications where space, weight, and environmental robustness are critical. Featuring advanced Silicon Carbide (SiC) technology, the AXS 500 delivers outstanding switching efficiency, enabling compact and lightweight power conversion with reduced thermal load and improved performance at high frequencies. Its direct liquid cooling system ensures stable operation even under high current loads, making it ideal for integration in propulsion systems, electric traction, and hybrid aviation. With a wide DC bus voltage range (50-800 Vdc), support for encoderless PMSM operation, and a fully programmable onboard PLC, the AXS 500 is not just a power stage-it's a smart, flexible building block for decentralized automation and high-reliability energy conversion. Developed by Phase Motion Control, the AXS 500 combines rugged hardware (IP65-rated) with a rich set of interfaces including RS422, CAN/CANOpen, EtherCAT, and the proprietary EtherPMC bus, ensuring seamless integration in both standard and custom architectures. • High Power Density: Compact and lightweight design enabled by SiC technology • Direct Liquid Cooling: For high continuous current and efficient heat dissipation • Three-Phase Full-Bridge SiC MosFET Stage: High-speed switching and reduced losses • Programmable On-board PLC: Enables decentralized logic and automation • Encoderless Operation: Supports PMSM motor control without sensors • Ruggedized Design: IP65 enclosure, resistant to shocks and vibrations • Selectable PWM Frequency: Configurable from 2 to 64 kHz • Multi-Drive Synchronization: Ideal for coordinated motion systems • Advanced Protection: Safe Torque Off (dual-channel), overcurrent, overvoltage, and thermal fault detection • Versatile Interfaces: RS422, CAN/CANOpen, EtherCAT, EtherPMC; supports EnDat, SSI, BISS, Tamagawa, HiperFace sensors APPLICATIONS ELECTRIC PROPULSION (BOATS, SUBMARINES, PUMPS, ACTUATORS) GROUND VEHICLES (TRUCkS, BUSES, EARTH-MOVING MACHINERY) ELECTRIC REPLACEMENT Of HYDRAULIC ACTUATORS ELECTRIC AND HYBRID AVIATION POWER CONVERSION SYSTEMS: AC/DC, DC/AC, OR DC/DC MOTION CONTROL

Connections & Interfaces • Analog Inputs: 2 programmable (0-30 V), isolated • Digital I/O: 4 in / 4 out, fully isolated • Sensor Interfaces: EnDat 2.2, SSI, BISS, Nikon, Tamagawa, HiperFace • Bus Interfaces: RS422, CAN/CANOpen, EtherCAT, proprietary EtherPMC • Safety: Dual-channel Safe Torque Off, protection against overvoltage, overcurrent, and overtemperature Environmental Requirements • Operating temperature: 0 - 45°C • Altitude: up to 2000 m (higher on request) Motor Drive Grid Active Rectifier DC/DC Conversion Electrical Data Spec DCLink Capacitance Maximum PWMfre^ency Nomin al flow rate,...

Company Headquarter 16145 Genova, Italy www.phase.eu Phase Automation Sarl 22 Rue Jean-Louis Calderon 69120, Vaulx-en-velin, France www.phase-automation.com Phase Automation GmbH Blindendorf 88 4312 Ried in der Riedmark Austria Phase USA, Inc. 1034 N DuPage Ave. Lombard,