eSpray EXTERNAL TABLET LUBRICATION SYSTEM
2Pages

EXTERNAL TABLET LUBRICATION SYSTEM The eSpray is a unique punch face and die wall lubrication system that continuously sprays dry lubricant onto tablet press tooling, delivering a consistent and verifiable amount of lubricant onto the product outer surface. It is the ideal solution to cope with issues such as capping, sticking, too high ejection force, chemical incompatibility with formulation or poor dissolution. The system applies only the needed amount of lubricant while vacuuming the excess directly from the nozzle to keep the production environment clean. It therefore helps to reduce the amount of dry lubricant in the blend, or even eliminate it in the case of new formulations. The minimal quantity of lubricant sprayed externally onto the tablets can be accurately measured and validated as below the threshold for listing as an ingredient in the formulation. Recommended in hygroscopic formulation Prevent capping and sticking issues Accurate spray rate thanks to high precision feeder Quantity of lubricant sprayed on tablets below 0,1% Retrofittable to all existing tablet presses Consistent amount of lubricant sprayed thanks to the venturi pressure control High under pressure vacuum integrated to prevent lubricant recirculation Available for single and double sided tablet press Fast & easy dismantling a

Technical data Easily retrofittable to all tablet presses PHARMA TECHNOLOGY Rue Graham Bell 8 B-1402 Thines (Nivelles) Belgium Tel: +32 67 70 13 00 E-Mail: info@pharmatec.be - Web site: www.pharmatec.be