DETAILED OVERVIEW Analytical Instruments for Science

The PG Spark CCD Metal Detector is widely used for quality control in the production process and finished product in the metallurgical fields of casting, machinery and metal processing. PG Spark can be used for chemical composition analysis of Ferrous, Aluminium, Copper, Nickel, Cobalt, Magnesium, Titanium, Zinc, Led, Silver and other metal alloys. Overview PG Spark CCD Optical Emission Spectrometer uses a high-resolution linear CCD to perform full-spectrum scanning from 130-900nm. The PG Spark also benefits from an intelligent argon controlled flushed spectrometer chamber system thus ensuring...

ANALYSIS REQUIREMENTS IN THE FOUNDRY Large Steel Plants where needs are at about 10ppm for elements such as C, N, Cr, S, P Pure Metal applications for purity of metals such as Al, Cu, Pb, Zn, Mg, Ti etc. Testing Laboratories, Commercial testing Labs, Small Foundries etc. Regulatory compliance for very low limits of detection such as Pb, As, Cd. Foundries which need a fast, accurate and precise analysis from materials in the production furnaces.  Analysis of non ferrous alloys such as Aluminium. Copper, Lead, Tin, Titanium, Silver etc.  Warehouse material identification  Manufacturing facilities....

Spark Stand The spark stand will take a maximum weight of 50Kg of sample. The Spark Stand has been specifically designed coaxial stand with an optimised internal gas circuit which greatly reduces argon comsumption. The sample cavity is cleaned by a Self Purging Function Schematic Drawing of Spark Stand and a series of sparks on a steel sample. Steel Sample showing a several Sparks. Spark Stand Schematic Spark Excitation Source  Discharge Parameters protected by Passwords.  Maximum Discharge Frequency – 1000Hz.  Maximum time before adjustment is 5000 hours  Self-purging function that keeps...

ANALYSIS RANGES ACHIEVABLE BY THE PG SPARK OES IN VARIOUS MATERIALS ELEMENTS FOR Fe BASED MATERIALS C Si Mn P S Cr Ni Mo Cu W V Ti Nb Al Mg Ce Zr Co B La As Pb Sn Sb Bi Ca Zn Se N Fe ELEMENTS FOR Al BASED MATERIALS Cd Cr Cu Fe Mg Mn Ni P Pb Si Sn Ti Zn Sb Sr V Zr Ag As B Be Ca Ce Ga Co Li Na Al ELEMENTS FOR Cu BASED MATERIALS Al As Be Bi Cd Co Fe Mg Mn Ni P Pb S Sb Si Sn Ti Zn Cr Zr Te Se In C B Au Ag Cu Detailed Specifications Optical System          Paschen Runge Mounted Spectrometer Spectral Range 130-800nm Focal length of Spectrometer is 500mm Holographic Grating with 2700 lines/mm...

High Resolution CCD Detector 3648 single chip CCD Pixels Single Pixel size of 8µm Spectrometer Layout with CCD and Channel Electronics. Programmable Control Argon-Flushes Spectrometer Chamber  The Spectrometer Optical Chamber is a NEW optical chamber with an extremely low thermal expansion coefficient which provides high instrument stability. The argon flush to the Spectrometer chamber is programmed and controlled via the software. The warm-up time for a ‘cold’ machine which has been shut down for 12 hours or more is ONLY 30 minutes. For a system in operation the start time is 5 minutes or less....

Calculation of the same element in different matrices using stored calibrations. Material Identification Support automatic calculation functions such as Carbon Equivalent. NET based port data acquisition' means communication between OES readout system and control pf PC via Ethernet TCP/IP ?  Re-calibration by 1 single sample possible. Basic Parameters of the PG Spark CCD-OES Spectrometer Power Supply Outline Dimensions Weight Operating Environment Argon Purity PG Spark CCD-OES Spectrometer Overview

EXAMPLE OF STABILITY FOR THE ANALYSIS OF ALUMINIUM ALLOYS OVER 10 ANALYTICAL DETERMINATIONS EXAMPLE OF STABILITY FOR THE ANALYSIS OF ALUMINIUM ALLOYS OVER 22 ANALYTICAL DETERMINATIONS FOR MORE INFORMATION CONTACT: PG INSTRUMENTS LIMITED ALMA PARK WOODWAY LANE. LE17 5FB UNITED KINGDOM PG Spark CCD-OES Spectrometer Overview Email [email protected]

instruments ALMA PARK, WIBTOFT LEICESTERSHIRE, LE17 5BH UNITED KINGDOM T: +44 (0)1455 220131 F: +44 (0)1455 220025 www.pginstruments.com