DTI/DTS £COOL Top energy efficiency and service-friendliness Effective cost-savings with the newest generation of cooling units

Cooling Units The εCOOL Family from Pfannenberg ε Everywhere you see the new COOL logo it stands for a Pfannenberg product that distinguishes itself by: - energy-efciency - environment - easy-handling εCOOL – the standard of the future With its new product range Pfannenberg is responding to the users’ increasing demands and to the growing climate awareness. The aim in developing the COOL series is the largest possible cost efciency with the best possible performance. The COOL series has made an enormous leap in development compared with the tried and tested DTI/DTS units, in particular in energy...

Cooling Units Effective Cost Savings with Pfannenberg Cooling Units Take a small business with 5 cooling units, which works in two shifts as an example. In comparison to the DTI 6401 with a 2000 W cooling capacity and a comparable unit available on the market. Energy savings comparison: The DTI 6401 saves 12% in energy costs in comparison to conventional cooling units. Savings of over 12% Energy costs annually (Euro) Your savings: over 12% Energy costs Conventional cooling units DTI 6401 Conventional cooling unit Assembly cost comparison: Your savings Assembly and service times (MTTR) [min] 45.00...

Cooling Units Cooling Unit Series Filter Adapter • Optionally available adapter for multiple use and all lter inserts • Optional lter inserts (aluminum, eece or uted lter inserts) depending on the environmental conditions / application • Patented uted lter mats extend the service intervals by 300% • Tool-less installation and tool-less lter replacement • Filter replacement in less than one minute • Filter adapter available in several colors New Energy Saving Mode with additional temperature probe Temperature [°C] / Capacity [W] Control cabinet temperature Target temperature + 35 °C (adjustable)...

Cooling Units εasy Handling: perfect service-friendliness decreases routine costs Thought-out solutions for installation and service From the cut-out compatibility to the exible software solutions: Pfannenberg’ COOL series takes excellent accessibility and simple maintenance into consideration. • Large condenser n spacing allow for longer maintenance periods, even without an additional Nano coating • One mounting cut-out for 5 different performances, 1000 W – 4000 W • Monting possible by 1 man in a few minutes • Simple accessibility to all the relevant components • Plug & Play: fast component...

Cooling Units Cooling units 4000 W DTI/DTS 6801 DTI: for partially recessed mounting of the cooling unit in the door or side DTS: for outer mounting of the cooling unit on the door or side • top EER (energy efciency ratio) • energy efcient: reduced CO2 emissions = environment-friendly • condenser with large n spacing for highly effective protection in strongly contaminated ambient air • large distance between intake and exhaust vents, safe circulation within the electrical enclosure due to long passage of air, therefore hot spots are eliminated • exceptional serviceability • new USB port (MC...

Cooling Units Cooling capacity performance curves Cooling capacity Kühlleistung Q0 [W] Q0 [W] Electrical enclosure Schaltschrankinternal temperatureTi i Innentemperatur T UmgebungstemperaturT U [°C] Ambient temperature T [°C] A SchaltschrankInnentemperatur Ti Q variants DTI 0 [W] partially recessed by 120 mm after installation 3500 Mounting holes Ø 8 mm and cut-out radii R20 2500 Further technical information can be found on the Internet under www.pfannenberg.com

Cooling Units Cooling units 2500/2000 W DTI/DTS 6501 DTI/DTS 6401 DTI: for partially recessed mounting of the cooling unit in the door or side DTS: for outer mounting of the cooling unit on the door or side • top EER (energy efciency ratio) • energy efcient: reduced CO2 emissions = environment-friendly • condenser with large n spacing for highly effective protection in strongly contaminated ambient air • large distance between intake and exhaust vents, safe circulation within the electrical enclosure due to long passage of air, therefore hot spots are eliminated • exceptional serviceability •...

Cooling Units Cooling capacity performance curves DTI/DTS 6501 DTI / DTS 9541 Cooling capacity Kühlleistung Q0 [W]] 0 [W DTI / DTS 9441 DTI/DTS 6401 Cooling capacity Kühlleistung [W Q0 [W]] Electrical enclosure Schaltschrankinternal temperatureTi i Innentemperatur T Electrical enclosure Schaltschrankinternal temperatureTi i Innentemperatur T UmgebungstemperaturTTU [°C] Ambient temperature [°C] Umgebungstemperatur TU [°C] Ambient temperature TA [°C] DTI variants partially recessed by 120 mm after installation Innentemperatur Q [W] 0 mm 485 1543 278 3000 Mounting holes Ø 8 mm and cut-out radii...

Cooling Units Cooling units 1500/1000 W DTI/DTS 6301 DTI/DTS 6201 DTI: for partially recessed mounting of the cooling unit in the door or side DTS: for outer mounting of the cooling unit on the door or side • top EER (energy efciency ratio) • energy efcient: reduced CO2 emissions = environment-friendly • condenser with large n spacing for highly effective protection in strongly contaminated ambient air • large distance between intake and exhaust vents, safe circulation within the electrical enclosure due to long passage of air, therefore hot spots are eliminated • exceptional serviceability •...

Cooling Units Cooling capacity performance curves DTI/DTS 6301 DTI / DTS 9341 Cooling capacity Kühlleistung [W] Q0 [W] DTI / DTS 9241 Cooling capacity Kühlleistung [W] Q0 [W] Electrical enclosure Schaltschrankinternal temperatureTi i Innentemperatur T Electrical enclosure Schaltschrankinternal temperatureTi i Innentemperatur T mm 485 1539 218 1500 Mounting holes Ø 8 mm and cut-out radii R20 1250 DTI variants partially recessed by 60 mm after installation Innentemperatur Q [W] 0 UmgebungstemperaturTTU [°C] Ambient temperature [°C] UmgebungstemperaturTTU [°C] Ambient temperature [°C] Further technical...