COOLING UNITS DTFS 6041 Green Series COOLING UNITS 870 W DTFS: a design for side mounting and fully recessed door or side installation • Maximum energy efficiency for significant energy savings and reduced operating costs • Energy-saving modes included as standard for an even greater reduction in operating costs • Significantly less refrigerant used for a better CO₂ footprint • F-Gas ready thanks to the use of low GWP refrigerants • Perfect service friendliness • Version DISPLAY - with temperature and error code indication, equipped with buttons for settings • Version LED - indication of operation status only • Modbus interface is optionally available for perfect machine integration Rated voltage ±10 % Cooling capacity according to EN 14511 Power consumption Starting current Energy efficiency ratio Unimpeded airflow (free flow) Ambient temperature Protection rating 225 integrated condensate evaporation system with safety overflow condensate drain towards the electrical enclosure if used as intended by the manufacturer towards the surroundings if used as intended by the manufacturer UL Type 12 electrostatically powder coated (200 °C), stainless steel on request electrostatically powder coated (200 °C), stainless steel on request R AL 7035 | other colours or stainless steel on request For additional information to ensure the accurate setting of the prefuse, please see manual. This information is included with the delivery of the unit or can be found at www.pfannenberg.com. PFANNENBERG.COM NEMA Design Control range (adjustable) Condensate management spring-type terminal included with plug Weight (without packaging)

ARTICLE NUMBER Condensate bottle For additional models, options and voltages visit www.pfannenberg.com or contact us directly. Cooling capacity performance curves Cooling capacity Q 0 [W] Electrical enclosure internal temperature T i