PETROSYSTEM Srl Via Gaspare Spontini, 29/4 - 00043 Ciampino (Roma) – Italy Tel:+39 06 7932.1621 Fax:+39 06 7932.1160 Email: [email protected] Inline Turbine Flowmeter Petrosystem turbine Flowmeters are designed to provide high order of performance, accuracy & reliability under the severest conditions encountered in Oil, Gas, Petrochemical, Aerospace and other industries. These flowmeters are precise, reliable, rugged and built to international standards. Sizes range from 5 to 300 mm with flanged end connections and 5 to 50 mm with threaded end connections. All flowmeters are individually calibrated on Rockwin's Inhouse Certified Caliration Laboratory · Linearity of +/- 0.50% of the reading · Rangeability of 10:1 · Both for Liquid & Gas Applications · SS construction Special end fittings also available MODEL SELECTION Model No. Flow Range M3/HR End Connection Threaded Ends End Connection Flanged ends Dimensions A D C 1010 0.11 - 1.1 1/2" 1/2"/DN15 64 127 150 1015S 0.22 - 2.2 3/4" 3/4"/DN20 64 127 150 1015 0.4 - 4 3/4" 3/4"/DN20 64 127 150 1020 0.8 - 8 3/4" 3/4"/DN20 83 140 150 1025 1.6 - 16 1" 1"/DN25 88 152 200 1040 3.4 - 34 1.5" 1.5"/DN40 114 178 200 1050 6.8 - 68 2" 2"/DN50 132 197 200 1075 13.5 - 135 N/A 3"/DN80 254 200 1100 27 - 270 N/A 4"/DN100 356 300 1150 55 - 550 N/A 6"/DN150 368 300

PETROSYSTEM Srl Via Gaspare Spontini, 29/4 - 00043 Ciampino (Roma) – Italy Tel:+39 06 7932.1621 Fax:+39 06 7932.1160 Email: [email protected] GENERAL SPECIFICATION PARAMETER METERS FOR LIQUIDS METERS FOR GASES Flow Range 0.03 to 2700 M3/Hr 0.88 to 8000 AM3/Hr Accuracy Linearity: +/- 0.5% over 10% to100% flow range. +/- 0.25% under specified conditions. Repeatability: +/- 0.02% to +/- 0.05%on 95% confidence level +/- 1% over 10% to 100% flow range (inclusive of linearity and repeatability) Max. Pressure Max. Pressure Threaded Meters- 250 kg/cm2 (4000 p.s.i.) Flanged metersaccording to flange...

PETROSYSTEM Srl Via Gaspare Spontini, 29/4 - 00043 Ciampino (Roma) – Italy Tel:+39 06 7932.1621 Fax:+39 06 7932.1160 Email: [email protected] Web: www.petrosystem.it Standard Inline Turbine Flowmete Series 6500 Series 6500 flowmeter is intended for high accuracy measurement of liquids and gases. Applications_: • oil, gas and • petrochemical • aerospace • automotive • Pharmaceutitical • power Features: • wide range of meter sizes • continuous, reliable on-line flow measurement • high levels of accuracy and repeatability • rangeability of 10:1 • low pressure drop • options to suit extensive applications...

PETROSYSTEM Srl Via Gaspare Spontini, 29/4 - 00043 Ciampino (Roma) – Italy Tel:+39 06 7932.1621 Fax:+39 06 7932.1160 Email: [email protected] Web: www.petrosystem.it Specification Flowmeter: General: Linearity: (Liquids) ±0.25% of reading for 2.5” meters and above ±0.5% of reading for 2.” Meters and below Environmental protection: IP65 (Gases) ±1% of reading Hazardous area certification: CENELEC EEx ia IIC T6 Ex d IIB T6 Repeatability: (Liquids) ±0.02% to 0.05% dependent on size Pressure drop: (Liquids) Typically 300mbar at normal maximum flow rate in water Installation: Install in pipeline...