PVDF FLOWMETER 800 Series Data sheet • • • • • • • • • • • • • • Low cost PVDF or PP body 1 – 2% FSD Sapphire bearings Hall effect sensor 6 Flow ranges Pulse output 10 Bar rating Viton seal as std. 8 & 12 mm hose 0.1% Repeatability 4.5 to 24 V dc 125°C Max Flow switch option Drink dispensing Laboratory tests Cooling equipment Active flow alarms Semiconductor plant The 800 series flowmeter is designed to give high performance and competitive pricing with 6 flow ranges from 0.05 to 15 liters per minute. It’s totally non-metallic wetted components makes this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept two hose sizes 8mm and 12mm although or OEM use alternatives are available. The bearings are made of sapphire for long life and reliability, the body is molded PVDF as standard an

TECHNICAL SPECIFICATION Model Flow range L/Min Standard Materials of construction Body and Cap - PVDF ‘O’ Ring seal - Viton Magnets - Ceramic Bearing - Sapphire ‘O’ ring material V = Viton N = Nitrile E = EPDM S = Silicon Flow switch option O = Standard I = Flow switch Body material P =PVDF O =Special Special OEM code O = Standard U = Uncalibrated e.g. 865-VOP-O is a flow range of 0.25 to 6.5 L/Min, Viton seal , standard, PVDF bodied flowmeter with a 6 point t

At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains chemically resistant ceramic magnets that are detected through the chamber wall by a Hall effect detector. The output is a NPN pulse that is readily interfaced with most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout.