*mydirectindustry

Catalogs
PETROSYSTEM
FLEXIBLE PACKERS WITH BYPASS Mod. BTB

FLEXIBLE PACKERS WITH BYPASS Mod. BTB

Product catalog summary

Description: Flexible Packers with By-pass are designed for point repair in pipes that already contain fluid. They are made from vulcanized SBR+NR rubber and high-strength fabrics, offering resistance to temperatures between -30°C and +70°C. The key advantage is their ability to facilitate evacuation inside the pipe due to their wheeled and by-pass designs, allowing for simultaneous point repair and quick access to the repair area. They can also be produced with a Push Rod compatible head.

Specifications: The document provides a detailed table of product specifications, including product code, size usage range, maximum working pressure, deflated plug dimensions, by-pass size, and approximate weight. The sizes range from 100 mm to 1000 mm in diameter, with varying lengths and weights depending on the model.

Key Parameters: - Temperature Resistance: -30°C to +70°C
- Maximum Working Pressure: Varies by model, up to 2.5 bar / 36 psi
- By-pass Size: Available in 2" and 3" depending on the model
- Weight: Ranges from 3.5 kg to 96.3 kg depending on the model

Applications: These packers are suitable for use in environments where fluid is present in the pipes, providing efficient repair solutions without the need to drain the system.

Catalog excerpts

PACKERS FLESSIBILI CON BYPASS FLEXIBLE PACKERS WITH BYPASS DESCRIZIONE: I Packer Flessibili con By-pass sono prodotti che consentono la riparazione di punti mentre nelle tubazioni è già presente del fluido. Sono prodotti mediante vulcanizzazione della gomma SBR+NR e tessuti ad alta resistenza. Resiste a temperature comprese tra -30°C e +70°C. Il vantaggio più grande si ha durante l'evacuazione all'interno del tubo, grazie alle sue ruote e disegni di bypass. Consente la riparazione dei punti e allo stesso tempo un rapido accesso all'area della toppa da riparare. *Può essere prodotta come testa compatibile con Push Rod. DESCRIPTION : Flexible Packer with By-pass are products that allow point repair while there is already fluid in the pipes. These are produced by vulcanizing SBR+NR rubber and high-strength fabrics. It is resistant to temperatures between -30°C and +70°C. The biggest advantage is when evacuating inside the pipe, thanks to its wheeled and by-pass designs. It allows point repair and rapid access to the patch area to be repaired at the same time. *Can be produced as a Push Rod compatible

Open the catalog to page 1

DIMENSIONI Dimensions Size Usage Range Product Code Deflated Plug Dimensions Diameter Total Lenght By-pass Size Approx. Weight

Open the catalog to page 2

All PETROSYSTEM catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list