DC-Transducer / T-Module Signal conditionning electronic for halfbridge transducers, mountable into frontpanels, output signal ±10 VDC or ±5 VDC, for full specification displacement of the transducer Application Dimension Fixing Supply voltage Signal output Signal conditionning for T-series transducers for TESA® compatible halfbridge transducers 30 x 55.5 mm (No casing) With threaded ring, hole diameter for socket fixing 18 mm Supply voltage 5, 12 or 24 VDC (±10 %) (please specify with order) current consumption 120, 50 or 25 mA Measuring stroke ±1 mm Measuring stroke ±1 mm Measuring stroke ±1 mm Measuring stroke ±2 mm Measuring stroke ±1 mm Measuring stroke ±5 mm (Setting 1 : 5) Measuring stroke ±2 mm Measuring stroke ±1 mm (Other specifications upon request) Connection Transducer supply Sensitivity Supply and signal: pads on PCB Transducer: socket 5 pin, 270 ° 73.75 mV/(Vmm) (into R = 2 kOhm ±0.1 %) Errors and omissions excepted, subject to change without notice

Examples for ordering DC-Transducer T101F as DC-Transducer with supply voltage 12 V, signal output ±10 V and measuring stroke ±1 mm: Transducer designation Type designation Measuring stroke Signal output (B = Bipolar, U = Unipolar) Supply voltage T-Module T-Module with supply voltage 12 V, signal output ±10 V and measuring stroke ±1 mm for a T101: TMT101S12B10W1 Type designation Transducer designation Measuring stroke Signal output (B = Bipolar, U = Unipolar) Supply voltage Cable Module Cable Module with supply voltage 12 V, signal output ±5 V and measuring stroke ±1 mm for a T101: Type designation...