Cable-Module / DIN-Rail Module DIN-Rail Module Signal conditionning electronic for halfbridge transducers, housed in DIN-Rail case, signal output ±10 VDC or ±5 VDC, for full specification displacment of the transducer Signal conditionning for T-series transducers for TESA® compatible halfbridge transducers 86 x 35 x 57.5 mm (Height from rail top surface) Supply voltage Supply voltage 5, 12 or 24 VDC (±10 %) (Please specify when ordering) current consumption 120, 50 or 25 mA Sgnal output Measuring stroke ±1 mm Measuring stroke ±1 mm Measuring stroke ±1 mm Measuring stroke ±2 mm Measuring stroke ±1 mm Measuring stroke ±5 mm (Setting 1 : 5) Measuring stroke ±2 mm Measuring stroke ±1 mm (Other specifications upon request) Connection Supply and signal: screw terminals Transducer: socket 5 pin, 270 ° Transducer supply 73.75 mV/(Vmm) (into R = 2 kOhm ±0.1 %) See examples for ordering on page 56 Errors and omissions excepted, subject to change without

Examples for ordering DC-Transducer T101F as DC-Transducer with supply voltage 12 V, signal output ±10 V and measuring stroke ±1 mm: Transducer designation Type designation Measuring stroke Signal output (B = Bipolar, U = Unipolar) Supply voltage T-Module T-Module with supply voltage 12 V, signal output ±10 V and measuring stroke ±1 mm for a T101: TMT101S12B10W1 Type designation Transducer designation Measuring stroke Signal output (B = Bipolar, U = Unipolar) Supply voltage Cable Module Cable Module with supply voltage 12 V, signal output ±5 V and measuring stroke ±1 mm for a T101: Type designation...