Cable-Module Signal conditionning for T-series transducers, socket to accept transducer plug, output signal ±10 VDC or ±5 VDC, for full specification displacement of the transducer Application Dimension Supply voltage Signal output Connection Transducer supply Sensitivity Ordering Drawing PETER HIRT GmbH Signal conditionning for T-series transducer For TESA® compatible halfbridge models Supply voltage 5, 12 or 24 VDC (±10 %) (Please specify with order) Current consumption 120, 50 or 25 mA Measuring stroke ±1 mm Measuring stroke ±1 mm Measuring stroke ±1 mm Measuring stroke ±2 mm Measuring stroke ±1 mm Measuring stroke ±5 mm (Setting 1 : 5) Measuring stroke ±2 mm Measuring stroke ±1 mm (Other specifications upon request) Supply and signal: cable PVC, length 1 m, prepared wires Transducer: socket 5 pin, 270 ° 3 V ±0.5 % RMS / 13 kHz ±5 % 73.75 mV/(Vmm) (into R = 2 kOhm ±0.1 %) See examples for ordering on page 56 Errors and omissions excepted, subject to change without notice

Examples for ordering DC-Transducer T101F as DC-Transducer with supply voltage 12 V, signal output ±10 V and measuring stroke ±1 mm: Transducer designation Type designation Measuring stroke Signal output (B = Bipolar, U = Unipolar) Supply voltage T-Module T-Module with supply voltage 12 V, signal output ±10 V and measuring stroke ±1 mm for a T101: TMT101S12B10W1 Type designation Transducer designation Measuring stroke Signal output (B = Bipolar, U = Unipolar) Supply voltage Cable Module Cable Module with supply voltage 12 V, signal output ±5 V and measuring stroke ±1 mm for a T101: Type designation...