Bursting Discs
Bursting Discs
- Materials: 316 stainless steel and Nickel Alloy with options for partially or fully FEP lined product contact areas.
- Bursting pressure, dimensions, and shape are application-dependent.
- Specific requirement: A ND65 flanged SRV requires a ND80 bursting disc.
- Assembly: 10'' bursting disc for H2O2 application.
- Bursting Pressure: Options of 4.5 or 6 Bar.
- Height: 103 mm.
- Includes: Weld-in flange, cover, screw kit, and gasket made of 316L stainless steel and PTFE.
- Part Numbers: 1119760045 for 4.5 bar and 1119760060 for 6 bar.
- Designed to relieve overpressure or vacuum conditions at a predetermined differential pressure and specific temperature.
- Pressure Setting: 3.67 Bar +/- 5% Tolerance at 20°C, with other settings available on request.
- Standard FEP lining and PTFE lining available.
- Options for partially or fully lined, including outer ring.
- Dimensions and other specifications available on request.
- Customer responsibility to ensure compatibility between valve materials and transported products.
- Contact: PEROLO SAS, 69 Rue des Maçons, 33390 Blaye, FRANCE. Phone: +33 (0)5 5742 67 00. Email: [email protected].
- Note: Specifications may change without notice due to continuous product improvement policy.
Catalog excerpts
Bursting Discs Accessories DRR & DRS The Perolo bursting discs are designed to burst open and relieve an overpressure or vacuum condition at a predetermined differential pressure, and specific temperature. PEROLO is an official Bursting Disc Distributor SPECIFICATION • 316 stainless steel & Nickel Alloy • Partially or fully FEP lined product contact area • Bursting pressure, dimensions and shape depending on application • A ND65 flanged SRV requires a ND80 (and not a ND65) bursting disc CODIFICATION STANDARD PART NUMBER YOUR PART NUMBER LINING OPTIONS partially lined fully lined (incl. outer ring) DIMENSIONS - others on request ND80 PRESSURE SETTING - others on request 3,67 Bar +/- 5% Tolerance at 20°C 367 4,84 Bar +/- 5% Tolerance at 20°C 484 LINING MATERIAL Standard FEP lining PTFE lining Single bursting disc Pack of 10 bursting discs Assembly 10'' bursting disc for H2O2 application Bursting pressure: 4,5 or 6 Bar Height: 103 mm Including weld-in flange (316L st st), cover (316L st st), screw kit and gasket (PTFE) Part Number: 1119760045 (4,5 bar) 1119760060 (6 bar) Due to our policy of continuous product improvement, specifications may change without notice - Specification sheet PWA BURSTING DISC B It is the customer's responsability to check the compatibility between valves material and transported product. PEROLO SAS, 69 Rue des Maçons, 33390 Blaye, FRANCE -Phone : + 33 (0)5 5742 67 00 - Email : [email protected]
Open the catalog to page 1All PEROLO catalogs and technical brochures
ND500 MULTIDO2 Pages
